[. . . ] Assembly Instructions for Model: VMAV
Thank you for choosing a Sanus Systems VisionMountTM VMAV. [. . . ] Please call Sanus Systems before returning products to the point of purchase. Required Tools: Drill, 1/4" drill bit and a socket set Supplied Parts and Hardware: Some parts not shown as actual size*
(1) Wall Plate - a*
(1) Cover - b*
(1) Tube - c*
(2) Cap - d
(4) Foot - e Step 1: Attach Wall Plate
(4) Lag Bolt - f
(2) Set Screw - g
(1) Allen Key - h
The Wall Plate (a) must be mounted to a wood stud. Make sure the Wall Plate is oriented so that the flat side is against the wall as shown in Diagram 1. Use the Wall Plate as a template to mark the 4 hole locations for the Lag Bolts (f) between the two edges of the chosen stud. Pre-drill four holes 2. 5" deep at the marked locations using a 1/4" drill bit. Attach the Wall Plate to the wall using all 4 of the Lag Bolts as shown in diagram 1. [. . . ] Diagram 4 c Detailed View
g
a
Sanus Systems 2221 Hwy 36 West, Saint Paul, MN 55113 7. 13. 05 Customer Service: 800. 359. 5520. [. . . ]