[. . . ] GRABADOR/REPRODUCTOR MINIDISC PORTTIL BRBAR MINISKIVINSPELARE GRAVADOR PORTTIL DE MINIDISCO PORTABLE MINIDISC RECORDER
MODELO MODELL MODELO MODEL
MD-MT180H
MANUAL DE MANEJO BRUKSANVISNING MANUAL DE OPERAO OPERATION MANUAL ESPAOL SVENSKA PORTUGUS ENGLISH Consulte las pginas i al vi y S-1 al S-42. Please refer to pages i to vi and E-1 to E-42.
for SEES TINSZ0781AWZZ
MD-MT180H
ENGLISH
Introduction
Thank you for purchasing this SHARP product. It will guide you in operating your SHARP product.
ENGLISH
Important Introduction
Contents
-Introduction/Contents-
Page
Important Introduction
Page
Useful Features
Special Notes . 26
Advanced Features
Power Source
Using with the Rechargeable Battery. [. . . ] Numbering restriction If you try to number more than 10 tracks in certain amount of time, "SORRY" will be displayed and the operation will be disabled. In stereo recording In 2 times long recording In 4 times long recording In monaural recording Within 40 seconds Within 80 seconds Within 160 seconds Within 80 seconds
You can record several pieces of music as a single track by disabling the auto marker function. When a recording is paused or whilst recording. . .
1 2 3
Press the MENU/CHRG button repeatedly to select "MARK". Press the MENU/CHRG button to select "MARK OFF".
Useful Features
Notes: When making digital recordings using a CD player or an MiniDisc player, track numbers will be created automatically regardless of the setting of the auto marker function. Complete the operation within 7 seconds whilst selecting the menus.
E-22
01/10/5
180H_E_4. fm
-Advanced Recording-
MD-MT180H
Advanced Recording (continued)
ENGLISH
About track numbers
1. Track numbers are created automatically during recording via the analogue connection when a silence of 1 second or more is detected (Auto marker function). A series of tracks can be recorded as one by disabling the auto marker function (see page 22).
Useful Features
-Advanced Recording-
About 1 second Silence First track Second track
When recording, if a programmed playback is performed by the source or playback is performed by selecting tracks manually, the MiniDisc track numbers may not be the same as on the source. Track numbers may not be created properly, depending on the connected stereo system.
About sampling rate converter
This portable MD incorporates a sampling rate converter meaning it can record from digital radios or DAT tape recorders.
Note for digital recording
2. When recording from a CD or a MiniDisc using the digital connection, track numbers will be created at the same points as on the CD or MiniDisc (Synchro marker function).
You cannot copy a MiniDisc that you recorded from digital inputs to another MiniDisc or DAT. Digital signals Digitally recorded MiniDisc Cannot record
Playback side Recording side
First track Track A First track Track A
Second track Third track Track B Track C Second track Third track Track C Track B
CD player, MiniDisc player, etc.
Digital connection
Digital connection
Track numbers may not be created in proper places, depending on the source to be recorded from, such as signals with noise. The track numbers on the playback side may not match the track numbers recorded on the MiniDisc.
E-23
01/10/5
180H_E_4. fm
Checking Displays
To check the elapsed time and remaining time of the track
During playback, press the MENU/CHRG button repeatedly to select "DISPLAY". Each time the button is pressed, the display will change as follows.
MD-MT180H
ENGLISH
To check the remaining recording time and the total playing time
Whilst in the stop mode, press the MENU/CHRG button repeatedly to select "DISPLAY". Each time the button is pressed, the display will change as follows.
1 2 3
1 2 3
Useful Features
A B
A B D
Elapsed playback time Remaining playback time
C
Track number Track name
Notes: If the disc name or the track name was not originally recorded on the MiniDisc, "NO NAME" will be displayed. Elapsed playback time and remaining playback time may be different from the actual time. The selected display will not change even after the disc is replaced. Complete the operation within 7 seconds whilst selecting the menus.
C
Total number of tracks Disc name
D
Remaining recording time Total playing time
Remaining recording time varies depending on the set recording mode. Remaining recording time will not be displayed with a playback only MiniDisc.
E-24
01/10/5
180H_E_4. fm
-Checking Displays-
MD-MT180H
Checking Displays (continued)
ENGLISH
To display the playing time of an individual track
Whilst in the stop mode, press the or button to display the track number and track name. Track number Track name
Checking the remaining amount of battery level
1
The remaining amount of battery level is shown by the battery indicator ( ) during operation.
How to read the battery indicator
Useful Features
-Checking Displays-
2 3 4
Press the MENU/CHRG button repeatedly to select "DISPLAY". Press the MENU/CHRG button to select the playing time.
When the battery level is high
When the battery level is very low
Playing time Each time the or button is pressed, the playing time of the previous or next track will be displayed.
When the battery is completely discharged, the battery indicator will flash. When the battery has run out completely, "BATT EMPTY" will appear. Notes: If you use the battery which you stopped charging halfway, " " may appear. The battery indicator will not correctly display the remaining capacity for approximately 10 seconds after the power has been turned on. [. . . ] Is the unit being subjected to excessive vibration?
The MiniDisc cannot be ejected. Has the track number or character information been written on the disc yet?Is the unit in the recording or editing mode?
No sound is heard from the earphones.
Is the volume set too low?Are you trying to play a MiniDisc with data on it instead of a MiniDisc containing music?
Recording and editing are impossible. [. . . ]