[. . . ] HIGH PERFORMANCE FURNITURE FOR YOUR HOME THEATER Deploy TM Assembly Instructions DeployTM Home Theater Furniture Your DeployTM Home Theater Furniture is engineered for easy assembly. [. . . ] The assembly workspace should be a non-marring surface such as carpet. If any parts are missing or damaged contact: BDI Customer Service at customerservice@bdiusa. com Unfold the metal legs on the assembled frame. Install the shelf pins into the desired location on the folding metal legs and the inside area of the wood frame using the allen wrench. Install the rubber bumper inserts to the assembled frame. Step 2 Insert back panel. Once the metal legs are opened, slide the back panel down into the "U" channel, and tighten the four threaded knobs to secure back panel into position. Note* threaded knobs are included with the assembled frame. Step 3 First, install the rubber bumper inserts to all of the hole locations on the center shelf support. [. . . ] On the rear side of the back panel, are 9 pre-drilled holes for installing the Velcro straps using a Phillips screw driver. Double Wide TV Stand Model 9624 Cherry 19" H x 49" W x 19. 5" D For flat panel TVs up to 50", or rear projection TVs up to 45". Triple Wide TV Stand Model 9629 Cherry 19" H x 61" W x 19. 5" D For flat panel TVs up to 62", or rear projection TVs up to 62". Double Wide TV Stand Model 9634 Espresso 19" H x 49" W x 18. 5" D For flat panel TVs up to 50", or rear projection TVs up to 45". Triple Wide TV Stand Model 9639 Espresso 19" H x 61" W x 18. 5" D For flat panel TVs up to 62", or rear projection TVs up to 62". [. . . ]