[. . . ] 3 Attach extension tubes or telescopic tube to the hose handle and floor nozzle by pushing and twisting together (some models, twist and pull apart to dismantle. 4 Extend the cable and connect to mains, ensuring the cable is not twisted before use (press handle to rewind cable. [. . . ] A safety device is fitted which prevents the cover closing without a dust bag in place. Changing/cleaning the filters Never use the cleaner without the filters in place. The filters should be changed/cleaned approximately every fifth dust bag. 12 Replace the old filter with a new one, ensuring it is securely in place, and close cover. to change Micro filter (some models): 13 Press the catch to open the filter cover. 14 Replace the old filter with a new one ensuring it is securely in place and the cover is properly closed. Cleaning the 02 HEPA filter (some models): The 02 HEPA filter should be cleaned when the indicator light is on (some models) or every fifth dust bag (some models). 16 Rinse the inside (dirty side) of the filter unit under warm tap water only. Replace the unit back into the cleaner and close cover ensuring it is properly fastened. Using the blowing outlet (some models) The blowing outlet can be used for drying damp shoes or clearing leaves etc: 17 Remove the filter cover. [. . . ] Water: If water is sucked into the cleaner the motor must be changed at a service centre. 5 Ställ kombiknappen (sitter under handtaget) till läget (A) för att rulla sladden in och ut efter behov, eller till läget (B) för att låsa fast den utdragna sladden (vissa modeller). [. . . ]