[. . . ] F5U002 Windows XP Installation NOTE: Drivers are not needed to install the USB to Parallel Adapter into Windows XP. [. . . ] A second "Found New Hardware" windows will appear in the same area as before and find "USB Printing Support". The final window "Found New Hardware" will appear stating, "Your new hardware is now installed and ready to use". Right click the "My Computer" icon and select "Properties". Click on the "Hardware" tab and select the "Device Manager" button. Click the (+) next to Universal Serial Bus Controllers" and look for "USB Printing Support" (the Belkin cable). If it shows properly without any question marks or exclamation marks, the cable is installed properly. [. . . ] Look at the bottom of the window and remove the () in front of the box called, "Enable bi-directional support" (if it's available) and click on "Apply". [. . . ]