[. . . ] The Belkin USB 10/100 Ethernet Adapter configures and sets up just like a network interface card (NIC) without the trouble of opening your computer and installing an add-in card or inserting an expensive PCMCIA card into your laptop. Once configured properly, there is no need to shut down your system to disconnect or reconnect the adapter. Our adapter conforms to both USB and Ethernet specifications, and functions as a full-speed USB device. The unit requires no external power supply since it is powered directly from the Universal Serial Bus. [. . . ] The "New Hardware Wizard" will now tell you "Windows has finished installing the software that your new hardware device requires" Click "Finish" . Once your computer has restarted, the Belkin USB 10/100 Ethernet Adapter will be active and working. If you are connecting to a cable modem or xDSL modem, follow the directions that came with your modem or from your Internet provider. If you are setting up a network, go to the section titled "Specifying TCP/IP Parameters" to configure your adapter. Windows® Millennium Edition (Me) 1 Close any Windows applications that you may be . 9 P73631_F5U122-PC-man. qxd 4/26/01 10:14 AM Page 10 Driver Installation (continued) 5 The "Add New Hardware Wizard" will appear telling you . "Windows has found the following hardware: USB Ethernet Adapter" Place a checkmark next to . "Automatic search for a better driver (recommended)" and click "Next" . 7 The "Add New Hardware Wizard" will indicate, "Belkin . USB Ethernet Adapter" and "Windows has finished installing the hardware device" Click "Finish" . Once your computer has restarted, the Belkin USB 10/100 Ethernet Adapter will be active and working. If you are connecting to a cable modem or xDSL modem, follow the directions that came with your modem or from your Internet provider. If you are setting up a network, go to the section titled "Specifying TCP/IP Parameters" to configure your adapter. Windows® 2000 1 Close any Windows applications that you may be . 10 P73631_F5U122-PC-man. qxd 4/26/01 10:14 AM Page 11 Driver Installation (continued) 4 A window will appear telling you that Windows has . If this window does not appear, contact your PC vendor for assistance. wizard will complete installation for this device: USB Ethernet Adapter" Select "Search for a suitable driver . "Floppy Disk Drives" and uncheck all other selected locations and click "OK" . The next window will tell you "Windows has finished installing the software for this device". Click "Finish" to complete the installation. Once your computer has restarted, the Belkin USB 10/100 Ethernet Adapter will be active and working. If you are connecting to a cable modem or xDSL modem, follow the directions that came with your modem or from your Internet provider. If you are setting up a network, go to the section titled 11 P73631_F5U122-PC-man. qxd 4/26/01 10:14 AM Page 12 Specifying TCP/IP Parameters This configuration procedure is identical to that of other network interfaces, for example, an Ethernet card. To access and change the networking properties in Windows® 9 8 1 Select "My Computer" / "Control Panel" / "Network" . [. . . ] This warranty does not apply if the product has been damaged by accident, abuse, misuse, or misapplication; if the product has been modified without the written permission of Belkin; or if any Belkin serial number has been removed or defaced. THE WARRANTY AND REMEDIES SET FORTH ABOVE ARE EXCLUSIVE IN LIEU OF ALL OTHERS, WHETHER ORAL OR WRITTEN, EXPRESSED OR IMPLIED. BELKIN SPECIFICALLY DISCLAIMS ANY AND ALL IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. No Belkin dealer, agent, or employee is authorized to make any modification, extension, or addition to this warranty. [. . . ]