[. . . ] B Yellow LED: indicates that the fast freeze function is in operation. [. . . ] C Red LED: indicates that the freezer internal temperature is too high.
D Green LED: indicates that the appliance is connected to the power supply. E Fast freeze button.
5019 603 01039
D
GB
F
NL
E
P
I
GR
S
N
DK
FIN
Freezer compartment temperature adjustment
The appliance is normally factory set for optimum operation at a temperature of -18°C. To adjust the compartment temperature, proceed as follows: · Turn the thermostat knob A to 1/Min for a storage temperature that is less cold. · To deactivate the fast freeze function, press the button (E); if the fast freeze function is not manually deactivated, after approx. · When the appliance is switched on, all the LEDs light up in sequence for a few seconds, after which the appliance begins operation.
Alarm signals
Signal Temperature alarm
The red LED lights up C
Cause
The internal temperature is above -12°C
Solution
Press button E until the temperature returns below -12°C again
Defrosting
1. To switch on the freezer again, turn knob A.
5019 603 01039
D
GB
F
NL
E
P
I
GR
S
N
DK
FIN
Printed in Italy
03/09
Follow the steps detailed in "Switching on the appliance". [. . . ] · When the appliance is switched on, all the LEDs light up in sequence for a few seconds, after which the appliance begins operation.
Alarm signals
Signal Temperature alarm
The red LED lights up C
Cause
The internal temperature is above -12°C
Solution
Press button E until the temperature returns below -12°C again
Defrosting
1. [. . . ]