Detailed instructions for use are in the User's Guide.
[. . . ] USER GUIDE C120 Eco
Congratulations on buying your SAGEMCOM telephone and thank you for placing your confidence in us. If you should have difficulties in operating it, we recommend that you consult this user manual. You can also find information on the following site : http://www. sagemcom. com To operate the device safely and easily, please read the section carefully “Recommendations and safety instructions”, page 4. Le marquage CE atteste de la conformité du produit aux exigences essentielles de la directive 1999 / 5 / CE du Parlement et du Conseil Européen concernant les équipements hertziens et les équipements terminaux de télécommunication. [. . . ] The setting to be modified (hour then minute) winks, press key or to set the required time; then press the key to confirm and go on to the next setting.
Setting the date format
• Go to Phone setting / Set Date/Time / Date format. Press key or to modify it (MM/DD or DD/MM).
ADJUSTING THE CONTRAST
Do this if you cannot read the screen display.
Modifying the date
• Go to Phone setting / Set Date/Time / Setdate. The setting to be modified (month then day) winks, press keyto set the required time; then press the key or to set the required time; then press the key go on to the next setting. • Select the level of contrast you want using the keys • When the required level is obtained, press confirm. to or .
ADJUSTING THE VOLUME OF THE RING TONE
• Go to Phone setting / Ring level. • Adjust the volume level (High / Medium / Low / Off) using keys or . Press , to confirm.
MODIFYING THE FLASH DURATION (KEY «R»)
If you connect your telephone to a private automatic branch exchange, or if you have an enquiry call service (operator service), you may have to modify the duration of the flash, which is set to 250 milliseconds by default. If you have to modify the duration of flashing, proceed as follows : • Go to Phone setting / Set flash time. Press the key to confirm.
When you activate the silence mode, there is no particular icon displayed on the telephone screen.
MODIFYING THE RING TONE
• Go to Phone setting / Ring melody. Press to confirm.
MODIFYING THE DIALLING MODE
If your telephone is connected to an old PABX, you may have to modify the dialling mode.
ACTIVATING / DEACTIVATING KEY BEEPS
• Go to Phone setting / Key tone. .
The default dialling mode is tone.
• Go to Phone setting / Dialing type. • Modify the dialling mode using keys Press to confirm.
DEFINING FORBIDDEN PREFIXES - CALL BARRING
You can prohibit the use of certain prefixes on your telephone. When a prefix is forbidden, it becomes impossible to call numbers that begin by this prefix. Depending on the programmed prefixes, certain numbers will no longer be accessible. For example, if you programmed 06 as a forbidden prefix, it will not be possible to call a number that begins by 06.
To create or modify a prefix: • Select an empty location or a prefix to be modified using keys or . To delete a prefix: • Select the prefix to be modified using keys Press . • Delete the prefix using the key
Modifying the base code
The access code is used to prevent forbidden prefixes from being modified. • Enter the old base code using the keypad (0000 par défaut). • Enter the new base code using the keypad, this must contain 4 digits. Press .
• Once the digits are deleted, press • Press to quit the menu.
Setting forbidden prefixes
You can set 5 forbidden prefixes. Press .
This function enables second call detection to be activated or deactivated during a call. Unless you are subscribed to the "Notify 2nd call" service and "Number display" service, there is no reason to activate this function. [. . . ] A) General Guarantee conditions SAGEMCOM undertakes to remedy by repair or exchange at its own convenience, free of charge for labour and replacement parts, any defects in the equipment during the guarantee period of 12 (twelve) months or 3 (three) months for accessories, from the date of original invoice of the Equipment, where those defects are a result of faulty workmanship. Unless the customer has concluded with SAGEMCOM a maintenance contract in respect of the equipment which specifically provides for repairs to be carried out at the customer`s premises, the repairs will not be carried out on the equipment at the customer premises. The customer must however return the defective equipment at his/her own expense, to the address supplied by the SAGEMCOM Helpdesk or by the retailer. In the case that a product needs to be sent in for a repair, it must always be accompanied by a proof of purchase (which is not altered, written on or in any way made illegible) showing that the product is still under guarantee. [. . . ]