Download your CAR GPS GARMIN NÜVI 42LM user guide or user manual


We hope that this user guide will be useful to you.
Once downloaded, you must make sure that the Manual matches the Product for which you intend to use it. You agree to remain entirely responsible for the use you do with the instructions contained in the document, no matter whether damages of losses occur following its use.

Manual abstract: user guide

Detailed instructions for use are in the User's Guide.

[. . . ] Connect the AC adapter to the nüvi and a wall outlet (included with the nüvi 360). 1. Clean and dry your windshield and the suction cup with a lint-free cloth. Tilt the nüvi back until it snaps into place. Follow the route to your destination using the Map page. [. . . ] Touch to return to the Menu page. Following Your Route Saving Places That You Search For 1. The place is saved in My Locations > Favorites. Touch to preview the turns in the route. Touch to zoom in. Finding Saved Places Acquiring Satellites Windshield USB connector Microphone Headphone jack quick reference guide August 2006 190-00671-01 Rev. B Printed in Taiwan Before the nüvi can find your current location and navigate a route, you must do the following: 1. Flip up the GPS antenna on the back of the nüvi, so that it is parallel to the ground. When the bars are green, the nüvi has acquired satellite signals; now you can select a destination and navigate to it. Microphone jack Touch to open the Trip Touch to open the Next Information page. Touch Go. Adding a Stop to Your Route To remove your nüvi from the cradle, press the small tab on the bottom of the cradle up, and tilt the nüvi forward. Do not leave your GPS unit exposed in an unattended vehicle on a hot day. To prevent damage, remove it from the vehicle; or store it out of direct sunlight, such as in the glove box. See the specifications in the owner's manual. On the Menu page, you can touch View Map to open the Map page. If adding, set your phone to Find Me/Discoverable mode, and touch OK on the nüvi. OR If changing, select your phone and touch OK, or touch Add Device and OK. If the pairing is successful, the Phone icon appears on the nüvi Menu page. To end the call, touch , and then touch End Call. Calling a Place 1. To end the call, touch , and then touch End Call. Using Traffic Features If you are using a traffic receiver, and you are receiving traffic data, you can view and avoid traffic incidents. For more information about Garmin FM traffic receivers, visit www. garmin. com/traffic. Connecting an FM Traffic Receiver Receiving a Call 1. Place your nüvi into the mount, and plug it into the 12/24-Volt adapter. Plug the mini-USB cable from the FM traffic receiver into the USB connector on the side of the nüvi. [. . . ] Plug the mini-USB cable from the FM traffic receiver into the USB connector on the side of the nüvi. to display a list of traffic incidents. More Information For more information about the nüvi, refer to the nüvi 310/360 Owner's Manual in one of the following locations: Included in the box. You must have Adobe Reader installed on your computer to view this manual. [. . . ]

Sponsored Links