User manual ACER AT2620 QUICK START GUIDE

[. . . ] AUTOMATIC SEEK TUNING Pressing this button will activate the Automatic Seek Tuning function. The radio will seek the next available station in the Up tuning direction and stop at that frequency. The Seek function can be stopped by pressing the button again or activating any other tuning function. 7 8 LOCAL/DISTANTselect the strength of the signals at which SELECTOR (LOC) This feature is used to the radio will stop during Automatic Seek Tuning. Pressing the button will select the Local setting ("LOC" will appear on the display panel) and only strong (local) stations will be received. [. . . ] Pressing the button again will select the Distant setting ("LOC" will disappear from the display panel) and the radio will stop at a wider range of signals, including weaker (more distant) stations. -2- blSTATIONPRE-SETMEMORIESbuttons, use the following To set any of the 6 pre-set memory procedure: 1. Select the first station to be pre-set using the Manual Up/Down or Automatic Seek Tuning functions. Press the pre-set button to be set and continue to hold the button in. The volume will momentarily mute and then return and the pre-set number will appear on the display panel. The station is now set into the memory of that pre-set button and can be re-called by momentarily pressing the button. Repeat the above procedure for the remaining 5 pre-sets on the band in use and for the other 4 bands of the unit. NOTE: Observe cassette operation cautions in Care and Maintenance section of this manual. 6 7 boFAST-FORWARD/EJECTBUTTONeject a cassette, simply This button performs two functions. To fast-forward the tape, depress the button half-way in to the locked position. To stop fast-forward and resume normal tape playback, depress the button slightly and release. Doing so can cause damage to the cassette and/or mechanism of the unit. We recommend you keep this manual for future reference of the many features found in this unit. As with any cassette player, the cassette section of this sound system does require a minimum of maintenance to keep it in good working condition. The following simple care and maintenance suggestions should be followed to prevent malfunctions of the cassette system. At least every 20 to 30 hours of operation you must clean the cassette mechanism. Do not insert a cassette that appears to be broken, twisted or dirty or with loose or torn labels on it. Always keep your cassettes away from direct sunlight or exposure to sub-freezing conditions. Before inserting a cassette in the player, check that the tape is tightly wound on the reels. Take up any excess slack using a pencil to turn the drive hub in the cassette (see diagram below). -6- Applies to automotive radios, radio/tape players, radio/CD players, CD changers, power amplifiers, equalizers and accessories. ACER CORPORATION (the Company) warrants to the original retail purchaser of this product that should this product or any part thereof, under normal use and conditions, be proven defective in material or workmanship within 12 months from the date of original purchase, such defect(s) will be repaired or replaced with new or reconditioned product (at the Company's option) without charge for parts and repair labor. To obtain repair or replacement within the terms of this Warranty, the product is to be delivered with proof of warranty coverage (e. g. [. . . ] To obtain repair or replacement within the terms of this Warranty, the product is to be delivered with proof of warranty coverage (e. g. dated bill of sale), specification of defect(s), transportation prepaid, to an approved warranty station or the Company at the address shown below. This Warranty does not extend to the elimination of externally generated static or noise, to correction of antenna problems, to costs incurred for installation, removal or reinstallation of the product, or to damage to tapes, compact discs, speakers, accessories, or vehicle electrical systems. This Warranty does not apply to any product or part thereof which, in the opinion of the Company, has suffered or been damaged through alteration, improper installation, mishandling, misuse, neglect, accident, or by removal or defacement of the factory serial number/bar code label(s). [. . . ]