User manual ACER MT230HML

[. . . ] 12. Use only the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. 13. Unplug this apparatus during lightning storms or when unused for long periods of time. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. [. . . ] 1. TV is in antenna mode. Connecting the Antenna 75-ohm coaxial cable (not supplied) OR VHF UHF or Cable 300-ohm twin-lead cable (not supplied) Antenna adapter (not supplied) VHF OR RF Input (back of TV unit) U/V mixer (not supplied) UHF Notes: 1. Also, you may press the FUNCTION (F) key along with the VOL +/ - keys to adjust the volume in increments or decrements of 4. To restore the volume, press MUTE again or press the VOL + key. Function Selection Menus To change the setting of any function, press the MENU key to bring up the main menu. Press the up or down arrow key to highlight the desired sub-menu and press the left or right arrow key to access. While in the sub-menu, use the up or down arrow key to select the item and the left or right arrow to adjust the setting. While in the setup menu, CH-/+ and VOL-/+ keys on the front panel will function as the down/up/left/right arrow keys on the remote control. Picture Menu Features This menu allows you to adjust the various picture settings. Use the up or down arrow key to move between the various settings, and the left or right arrow key to adjust them. Tint: -31 (more greenish) to +31 (more purplish) Brightness: 0 (dimmest) to 63 (brightest) Contrast: 0 (minimum contrast) to 63 (maximum contrast) Color: 0 (minimum color) to 63 (maximum color) Sharp: 0 (minimum sharpness) to 63 Picture Tint Brightnes s Contrast Color Sharp 00 31 31 31 31 9 Instruction Manual FUNCTIONS & FEATURES (continued) Tuner Menu Note: This menu is only accessible while the TV is in Tuner mode. Channel:This feature allows you to change the channel displaying on screen. Use the left or right arrow key or the numeric keypad to change the channel. Add/Erase: This feature allows you to add or remove the channel currently display on screen to the "active channel list" . Use the down arrow key to highlight Pass Code, then enter the new Pass Code using the numeric keypad. Note: The factory default pass code of 6688 is also the override code, in case you forget your new pass Movie G PG PG-13 R NC-17 X Rating U U U U U U Pass Code Menu Grid Pass Code Control Pass Code 6688 11 Instruction Manual FU N C T I ONS & F E A T U R E S Useful Remote Control Features DISPLAY This key allows you to display the current information of the TV screen on the upper right hand corner of the screen. (channel, antenna mode, time, video, etc. ) TIMER This key allows you to directly access the Timer menu. SCAN Press the SCAN key twice, and the TV will begin to scan through all active channels. PICTURE Your TV has factory preset picture modes that allow you to optimize your TV viewing. To activate these picture modes, press the PICTURE key, and you can choose among Memory, Theater and Normal. RECALL This key will allow you to return to the last channel you were viewing. CC Pressing the CC key will activate the currently selected Closed Captions or Text under the System Menu. VIDEO This key allows you to toggle between antenna and different video modes. Child Lock The Child Lock feature prevents unauthorized viewing of the TV. Please note that the only way to activate or deactivate the Child Lock feature is via remote control - please insure that it is stored securely. [. . . ] · These warranties are effective only if the product is purchased and operated in the U. S. A. · Labor service charges for set installation, setup, adjustment of customer controls and installation or repair of any type of antenna or cable systems are not covered by this warranty. Reception problems caused by inadequate antenna or cable system are your responsibility. · Warranties extend only to defects in materials or workmanship as limited above and do not extend to any product or parts which have been lost or discarded by you or damage to product or parts caused by misuse, accident, damage caused by Acts of God, such as lightning or fluctuations in electrical power, improper installation, improper maintenance or use in violation of instructions furnished by us; or to product which has been modified or had the serial number removed, altered, defaced or rendered illegible. [. . . ]