User manual ADS TECH DVD XPRESS DX2

[. . . ] ADS Technologies (ADS) makes no warranty of any kind with regard to this material, including but not limited to, the implied warranties of merchantability and fitness for a particular purpose. The information furnished within this written document is for information purposes only and is subject to change without notice. ADS Technologies assumes no responsibility or liability for any errors or inaccuracies that may appear herein. ADS makes no commitment to update or to keep current information contained within this document. [. . . ] You can set up to be warned if you don't have enough disk space available when you begin recording. Check this box to enable the feature and set the slider to the amount of disk space you feel comfortable as a warning level. This presents a Recording Options dialog box with the following selections: If this is enabled, you will receive a prompt confirming when ever you click the Record button. This may be used to more accurately time the beginning of a recording session. Enabling this feature will cause the "Recording Options" box to appear when you click the Record Button. When you click the Record button you will be presented with a dialog box which allows you to set the hours, minutes and seconds for recording delay. For example if you want to start recording in 1 hour, set to one hour, after one hour, recording will start automatically. If you are doing a long capture you may want to disable your screen saver. Sometimes, depending upon the graphics card you are using, a screensaver, can disrupt the video capture. If you know you want to record for exactly 1 hour, you can set the record duration, hours, minutes and seconds exactly. Start recording and walk away knowing that the recording will stop at the time limit you determine. Use this function to start and stop a recording based on your Computer System Time Clock. Set the Start Date and Time and Stop Date and Time, then check the box "Use start and stop recording times specified". By clicking the Wizard button, the Wizard Steps will start on your screen and you can make any changes needed. If you click this button by mistake, just click Cancel on the Step1 screen. This information is important if you have any problems and need to contact the Tech Support for help. This will bring up an Adobe Acrobat file that will display this CapWiz manual. You can click the copy button and paste this information in an e-mail and send to the Tech Support member if he/she requests it. We made it easy and simple for you to capture video for playback in your favorite Portable Media Player device. To assist you in this step, we added the options for iPodTM (MPEG-4) and Sony PSPTM (MPEG-4) in the Audio / Video Format window. You can capture video in the correct format and then transfer the video to your Video iPodTM using iTunes or to your Sony PSPTM by just copying the captured files to the Sony PSPTM (you need a Memory Stick DuoTM with available free space in your Sony PSPTM for playback). 5 Set your video source to the beginning frame you want to capture 6 When ready, press "PLAY" on your video source and press "RECORD" button on the CapWiz GUI to start capturing. [. . . ] Your primary source for information and assistance is always your computer store or computer parts dealer. If your ADS product needs repair or replacement, contact your dealer for on-site repair service. The ADS Technologies technical support and customer service staff can aid in solving many problems. Our technical support department is available to repair any ADS Technologies product. [. . . ]