User manual ADS TECH MEDIA-LINK MLX-581

[. . . ] The icon for each of the PC Server will show you the status for that Server. Simple steps on how to add a new Media-Link Software PC Enter your corresponding computer name and its corresponding IP address. Enter the new IP address for your Server PC running the Media-Link Software. Simple steps on how to delete a PC running Media-Link Software You are now on the Options menu of the Setup Page 3. [. . . ] Your home network's connection to the internet If your Media-Link device is having trouble connecting to the internet, please check the following : Check the internet link is available Using your PC, try to navigate the Internet by accessing any website. If you have problems, you need to verify if your ISP (Internet Service Provider) is working correctly or not. If you are using Dial Up Service connection Ensure that the dial-up modem is connected to the phone line and that internet activity is available by first surfing the net through via your browser. Using broadband If you have a broadband internet connection, try connecting to any website that always have reliable access. also ensure that the broadband internet connection is always connected. Check Online Support Check for further FAQ on our online support at http://www. / Q4: Media-Link is not connecting to my home network Answer: Any of the following may help you troubleshoot the problem. You may not need to follow every step of the following, just follow the ones that most fit to the symptom you are facing. check network adapter For wireless networking , the network adapter connected may not be supported. If the network adapter you are using is compatible and functioning properly, check for the MAC address by going to the IP Configuration setup page. Make sure that the MAC address, which is a 6 field with 2 digit number, is di played. If you do not see a value, then the network adapter is not recognized by Media-Link or the network adapter is not working properly. Upon plugging in the network cable to the Media-Link device, you should see the LINK/ACT LED light ON (in front of the Media-Link device). Check connection to the network adapter Unplugged either the WIFI network adapter or your LAN cable and plug it back in again. Once if it is connected correctly, you will be able to see the LED turn ON in the LINK/ACT indicator. Restart Media-Link The network settings may not be complete during the initial star up of your Media-Link device. Please reboot your system by pressing the "Power" button on your remote control. Check physical connection and activity Ensure that all network equipment is receiving power and that all cable connections for routers, hub, access points and computers in your home network are working. verify the "LINK/ACT" light is lit on all the devices connected to the network. Power-Cycle Network Devices If you have a wireless access point or a router, please reset it by turning off the power and turning it back on. [. . . ] The following steps may be able to help improve the signal strength: Make sure the wireless adapter is placed well away from any power supply, power line or surge protectors. Any of these items may cause interference and reduces the signal strength. Move the access point to higher position or give a better line of site to your wireless network adapter. Reduce the distance between your wireless adapter card and access point. [. . . ]