User manual ADS TECH PYRO 1394 PCI CARD

[. . . ] PYRO 1394 PCI Card Upgrade Your Computer to FireWire http://www. adstech. com ADS Technologies - 12627 Hidden Creek Way - Cerritos - CA - 90703 Phone: 562. 926. 1928 - Fax: 562. 926. 0518 - Support: 562. 926. 4338 PYRO 1394 PCI Card Hardware Installation Step 1 Power down your computer and disconnect the power cord. [. . . ] If there is a screw, place it in a safe place as you will be using it to attach the PYRO 1394 PCI Card. Apply pressure as needed (but do not force the card) until the edge connector is completely sealed. 2 Step 9 Once the PYRO 1394 PCI Card is fully seated, the gold edge connectors are completely in the slot. Step 10 Mount the PYRO 1394 PCI Card in place with a screw. Make sure the screw is firmly tightened so the PYRO 1394 PCI Card does not slide out of its seated position. Step 11 Replace the computer's shell and screw it back in place with the screws you removed in step 2. Step 12 Now that your PYRO 1394 PCI Card is installed and the shell is in place, you can safely connect the power cable. Now restart your computer and install the drivers from the CD. 3 Driver Installation for Windows Step 1 To the left is a picture of the dialog box that will notify you that Windows has detected your new hardware. Step 2 Windows will now automatically run the "Add New Hardware Wizard. " Select the first option "Search for the best driver. . . " and click the "Next" button. Step 3 You will now see a box that asks where you would like to search for the drivers. Make sure you have the Windows 98 SE, Windows 2000, or Windows ME CD inserted in your CD-ROM drive. [. . . ] All that is needed from you now is to click the "Finish" button. [. . . ]