User manual ADS TECH USBAV-700 USB INSTANT DVD

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual ADS TECH USBAV-700 USB INSTANT DVD. We hope that this ADS TECH USBAV-700 USB INSTANT DVD user guide will be useful to you.


ADS TECH USBAV-700 USB INSTANT DVD : Download the complete user guide (871 Ko)

Manual abstract: user guide ADS TECH USBAV-700 USB INSTANT DVD

Detailed instructions for use are in the User's Guide.

[. . . ] IBM is a registered trademark of the International Business Machines, Inc. ADS Technologies (ADS) makes no warranty of any kind with regard to this material, including but not limited to, the implied warranties of merchantability and fitness for a particular purpose. The information furnished within this written document is for information purposes only and is subject to change without notice. ADS Technologies assumes no responsibility or liability for any errors or inaccuracies that may appear herein. [. . . ] Follow these step by step instructions to connect your USB Instant DVD and install device drivers and software applications: 1. ) INSERT CD - Insert the USB Instant DVD CD into your PC's CD-ROM drive. 3. ) CONNECT USB ­ Connect the USB cable between a USB Port on your PC and the Instant DVD unit. Cconnect directly to an available USB port on the motherboard or extra USB PCI host card such as the ADS USB Port card. 6 uvs5_1edited. p65 6 12/5/01, 10:47 AM 4. Install Device Drivers and Application Software Install Device Drivers Windows will detect the device and install the device drivers. Windows will find the drivers on the Instant DVD CD and load them for you. Follow the instructions on the New Hardware Wizard and click "Finish" once the drivers are installed. Install Application Software The USB Instant DVD AutoRun installation menu should be on the screen. Follow these steps to install necessary software applications: 1. ) Click the "Install Drivers" button to install the all necessary drivers install the USB Instant DVD capture and export utility and other software that is NECESSARY for proper installation of the device. This will install the MyDVD 3. 0 application. Install all the other bundled software now or at a later time by inserting the Instant DVD CD and selecting the desired software application. ] Installation notes: During the Instant DVD application installation we will prompt you to enable "DMA" on your IDE hard drives. When DMA is not enabled you will likely drop video frames resulting in jerky video captures. If your resolution is not high enough you will not be able to view the video at full resolution. 7 uvs5_1edited. p65 7 12/5/01, 10:47 AM 5. Verify Hardware Installation Check Device Manager to verify that the USB Instant DVD hardware is recognized by Windows and is properly installed. If USB Instant DVD is listed under the Imaging Device heading, then the device is properly installed. 8 uvs5_1edited. p65 8 12/5/01, 10:47 AM 5. Windows Audio Mixer Settings Windows Audio Mixer Settings USB Instant DVD uses your computer sound card to record and playback the audio portion of your video recordings. Volume/ Play Control Mixer 1. ) Click "Mute" on the Line-In Mixer. If Line-In is not present click "Options" and select Line-In as one of the mixer options that should appear in the Volume/Play Control mixer. Don't worry, you'll still hear the audio when you preview or record your video. This means that it records and play's back at the same time so you will hear the playback through the sound card while previewing and recording video. If you hear and echo while recording video, check your mixer and be sure Line-In is muted or check your sound card to be certain that it supports full duplex. Record Mixer 1. ) Make the Record Mixer appear by Clicking Options on the Volume/Play Control Mixer & click the "Recording" option. 2. ) When switching to Recording, be sure that the Line-In option is selected. Start Making DVD Movies By now you should have completed the following: 1. ) Made all of the Audio and Video connections between Instant DVD and your Audio/Video equipment. 2. ) Connected Instant DVD to the Power Supply and USB Port on your PC. 3. ) Installed USB drivers and verified the device is properly installed 4. ) Installed all necessary software applications required for proper operation. 5. ) Now you are ready to Start Making DVD Movies. USB Instant DVD Capture/Playback Now you are ready to start capturing video. [. . . ] This includes damage to property and, to the extent permitted by law, damages for personal injury. This warranty is in lieu of all other warranties including implied warranties of merchantability and fitness for a particular purpose. FCC Information Federal communications Commission Radio Frequency Interference Statement Note: This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a residential installation. This equipment generates, uses and can radiate radio frequency energy and if not installed and used in accordance with the instruction manual may cause harmful interference to radio communications. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE ADS TECH USBAV-700 USB INSTANT DVD




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual ADS TECH USBAV-700 USB INSTANT DVD will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.