User manual AEG-ELECTROLUX EFC9536U

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual AEG-ELECTROLUX EFC9536U. We hope that this AEG-ELECTROLUX EFC9536U user guide will be useful to you.


AEG-ELECTROLUX EFC9536U : Download the complete user guide (502 Ko)

You may also download the following manuals related to this product:

   AEG-ELECTROLUX EFC9536U (483 ko)
   AEG-ELECTROLUX EFC9536U (502 ko)

Manual abstract: user guide AEG-ELECTROLUX EFC9536U

Detailed instructions for use are in the User's Guide.

[. . . ] In case it is used an ELECTROLUX COOKER HOOD in an low energy consumption house or in a house with confort air, it is necessary to follow the data of the producer, in order not to affect the air behaviour in a negative way. If the cooker is gas, it is not advisable to use the hood at the same time as fireplaces, furnaces, gas or other fuel stoves, or water heaters which burn up oxygen from the environment in order to function, and in any case depression in the cooker area must be below 4 Pa (0. If in doubt, national and international standards precisely indicate the rules for the state of art installation of gas systems and for environment air change, to avoid the possibility of incomplete combustions with the risk of poisonous fumes being emitted (see FIG. 5) If the hood is to be used as a filtering hood, it is necessary to purchase carbon filters (see ACCESSORIES). [. . . ] Should there be any doubt, contact anyone specialising in the installation of gas or ventilation system. 1 WARNING The electrical connection can only be carried out by qualified professional personnel, using standard material and state of the art installation methods. The manufacturer declines any responsibility for installations carried out by unskilled persons and for installations which are not in conformity with the standard norms concerning electrical safety (both concerning methods and materials). 2 ELECTRICAL TECHNICAL DATA The electrical technical data are visible inside the hood after the removal of the grease filters. 3 CONNECTION TO THE POWER SUPPLY The flexible feed cable supplied is already connected internally and emerges from the hood near the air outlet duct. Check that the electrical data indicated are in conformity with the main voltage and frequency values of the building where the hood is to be installed; · Check that the building is fitted with electric safety systems to protect against short circuits and electric shock systems, according to the laws in force; · Install an electric socket (or connection point) with a bipolar switch, which has contacts with an opening of at least 3 mms; · If it is intended to install the hood with a plug, it is necessary that you have access to the plug. Always turn off the main voltage supply by means of the bipolar switch before connecting and switch on again only when connections have been completed, tested and are safe. Repairs, including the replacement of the feed cable if necessary, are to be carried out only by qualified personnel, using standard methods, instruments and materials. Any repairs carried out by others could prove to be dangerous and could be a fire risk. Before using for the first time, ensure that all the points in the previous paragraphs have been complied with. The hood is not proper for the use of children and people with reduced mental, physical and sensorial capacities unless they have been trained on purpose by the person responsible for their security. The functions activated by the push buttons are as follows: LIGHTS: switch the lights on and off; TIMER: if pressed when the hood is already functioning with 1st, 2nd, 3rd or 4th speed, the led point connected with the selected speed, starts to flash for 10 minutes, after which motor automatically stops. MEANING OF THE LED POINTS: if the leds connected with the speeds are flashing, there is a timing running. 1st Speed; 2nd Speed; 3rd Speed; 4th Speed; 5th Speed; led point is flashing; 6th Speed; led point is flashing. 5th and 6th Speed must be used just for short periods as the hood is taking in a big quantity of air so after 10 minutes the motor is automatically reset to the 3rd speed. 2 AUTOMATIC CONTROL OF GREASE AND CARBON FILTER the electronic controls with led points allow automatic control of the grease filters and carbon filters (only in case the hood is used in filtering version) so that the user does not have to remember when maintenance was last carried out. When the grease filters require cleaning, an acoustic signal is issued for some seconds and the led point above the timer push button keeps on flashing. When the carbon filters need replacing or regeneration, an acoustic signal is issued for some seconds and the led point above the light push button keeps on flashing. TO PUT THE GREASE AND CARBON FILTERS CONTROL BACK TO ZERO To put the grease filter counter back to zero you must: · stop the motor; · Press the timer push button twice in succession, until you hear the acoustic signal. To put the carbon filter counter back to zero you must: · stop the motor; · Press the light push button twice in succession until you hear the acoustic signal. ATTENTION: The light push button does not switch on/off the lights until you hear acoustic signal. If you wish to use the hood in the filtering version, proceed as follows: · Disconnect hood from electricity and then reconnect this to electricity; · During this time press the light push button 3 times. [. . . ] The solution should be applied first onto a soft cloth which is then rubbed over the shell. It is important to follow the pattern of the satin finish with the cloth (see FIG. The cloth used should not have any buttons, zips, fasteners or anything else which could scratch the surface. The use of harsh abrasive or granular products, petrol, spirits or similar products which could damage the surface of the materiall, is severely forbidden. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE AEG-ELECTROLUX EFC9536U




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual AEG-ELECTROLUX EFC9536U will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.