User manual AEG-ELECTROLUX EHD620P

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual AEG-ELECTROLUX EHD620P. We hope that this AEG-ELECTROLUX EHD620P user guide will be useful to you.


AEG-ELECTROLUX EHD620P : Download the complete user guide (1035 Ko)

You may also download the following manuals related to this product:

   AEG-ELECTROLUX EHD620P (1051 ko)
   AEG-ELECTROLUX EHD620P (1339 ko)

Manual abstract: user guide AEG-ELECTROLUX EHD620P

Detailed instructions for use are in the User's Guide.

[. . . ] Correct use · This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety" · Do not leave the appliance unattended during operation. · This appliance should be used only for normal domestic cooking and frying of food. · The appliance must not be used as a work surface or as a storage surface. · Additions or modifications to the appliance are not permitted. [. . . ] Control panel To switch on Touch Display The light elements in the control bar light up. The display flashes The heat setting selected is shown in the display. The display above will go out. To switch off Select the heat setting 1-9 cooking zones automatically switch back to the heat setting set previously. Power Management The cooking zones of the cooking surface have a maximum power. 3 If the power function has ended, the Example: the heat setting 9 is selected on one cooking zone. The power function is carried out but the heat setting 9 of one of the cooking zones and the power function for the other cooking zone of the pair exceed the maximum power for both at the same time. For this purpose, the power management reduces the power of the cooking zone that switched on first from 9 to example 5 and the display of this cooking zone changes between 9 and 5 and then stays at the current possible maximum 5. (If the display changes between 9 and 5 or 9 and 3 or another value depends on the type of appliance and the size of the cooking zone. ). The maximum power is reached when the heat setting 9 has been set for all cooking zones. Two cooking zones generate a pair (see figure) and therefore, the power management shares the maximum available power between these cooking zones. When the power function is selected for one cooking zone, the power management makes the additional power for this cooking zone available by reducing the power of the corresponding other cooking zone. electrolux 11 Using the timer Function Automatic cut-out Condition a heat setting is set Outcome after the time has elapsed acoustic signal 00 flashes Cooking zone switches off acoustic signal 00 flashes Countdown timer cooking zones not in use 3 If just one countdown value is set you 3 If a heat setting is set on this cooking 3 If a cooking zone is switched off, the Step 1. Touch Control panel once can change it only when the appliance is switched on. zone in addition to a countdown timer, the cooking zone is switched off after the time set has elapsed. timer function set is also switched off. If the cooking zone is supposed to be hot, call the Customer Service Department. Uncover sensor field Repeated acoustic signal (6x), ap- One or more sensor fields have pliance switches off been covered for longer than 10 seconds Acoustic signal sounds when appliance is switched off The control panel is wholly or part- Remove objects. Do not place any objects on the control panel Acoustic signal sounds and appli- The On/Off sensor field has been ance switches itself on and then covered up, e. g. by a cloth off again; after 5 seconds another acoustic signal sounds Display is switching between two heat settings lights up Power management is reducing the power of this cooking zone Unsuitable cookware See the section "Switching the power function on and off" Use suitable cookware No cookware on the cooking zone Place cookware on the cooking zone The diameter of the bottom of the cookware is too small for the cooking zone lights up Overheating protection for the cooking zone has been triggered Automatic switch-off has been triggered Move onto a smaller cooking zone Use suitable cookware Switch off the cooking zone. Switch appliance on again 18 electrolux Problem and number are displayed Possible cause Electronics fault Remedy Disconnect the appliance from the electrical supply for a few minutes (Take the fuse out of the house's wiring system) If after switching on again, is displayed again, call the customer service department If you are unable to remedy the problem by following the above suggestions, please contact your local Service Force Centre. Repairs to the appliance are only to be carried out by qualified service engineers. 3 If the appliance has been operated incorrectly, the engineer's visit will be chargeable, even during the warranty period. Operating noises Depending on the material and the processing of the base, the following noises may occur when using induction cooking zones. · Cracking noise (1) when using cookware made of different materials (Sandwich construction) · Whistling (1) when using an individual cooking zone or several cooking zones with high powers when the cookware is made of different materials (Sandwich construction) · Humming (2) can occur at high power levels · Clicking (2) during electric switching processes · Hissing, buzzing (3) The device is fitted with a fan for cooling the electrics. A whiring noise can be heard when operating the fan which may deviate depending on the performance and may continue for a while after the appliance is switched off. The noises described are normal and do not refer to any defects. electrolux 19 1 2 3 Disposal 2 Packaging material The packaging materials are environmentally friendly and can be recycled. [. . . ] ­ For the four corners of the rabbet the ends of the sealing tapes must be cut into mitres. ­ Stick the sealing tape flush into the corner of the rabbet, so that no silicon compound can get under the glass ceramic when grouting. ­ Don't stretch the tapes when sticking them on. 22 electrolux Assembly electrolux 23 24 electrolux 1 WARNING!Surface temperature of base exceed 95°C, under bench access must be restricted by use of non-combustible barrier on installation. Rating Plate EHD60150I 55GADD5AU ELECTROLUX 230 V 50 Hz 949 592 874 Induction 7, 4 kW 7, 4 kW electrolux 25 Guarantee/Customer Service Warranty FOR SALES IN AUSTRALIA AND NEW ZEALAND APPLIANCE: ELECTROLUX This document sets out the terms and conditions of product warranties for Electrolux branded appliances. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE AEG-ELECTROLUX EHD620P




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual AEG-ELECTROLUX EHD620P will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.