User manual AEG-ELECTROLUX EHG3901

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual AEG-ELECTROLUX EHG3901. We hope that this AEG-ELECTROLUX EHG3901 user guide will be useful to you.


AEG-ELECTROLUX EHG3901 : Download the complete user guide (160 Ko)

Manual abstract: user guide AEG-ELECTROLUX EHG3901

Detailed instructions for use are in the User's Guide.

[. . . ] Prolonged intensive use of the appliance may call for additional ventilation, for example opening of a window, or more effective ventilation, for example increasing the level of mechanical ventilation where present. Once you removed all packaging from the appliance, ensure that it is not damaged and the electric cable is in perfect conditions. Otherwise, contact your dealer before proceeding with the installation. The manufacturer disclaims any responsability should all the safety measures not be carried out. · · · · About Installation, Cleaning and Manteinance · It is mandatory that all operations required for the installation are carried out by a qualified or competent person, in accordance with existing rules and regulations. [. . . ] The symbols on the knobs mean that : there is no gas supply there is maximum gas supply / Ignition setting there is minimum gas supply Lighting the burners For easier lighting, proceed before putting a pan on the pan support. Push the relevant knob down and turn it anti-clockwise until it reaches the "maximum" position. Then, check the flame is regular and adjust it as required. 3 If you cannot light the flame even after several attempts, check the "cap" (Fig. In the absence of electricity, ignition can occur without the electrical device; in this case approach the burner with a flame, push the relevant knob down and turn it anti-clockwise until it reaches the "maximum" position. Always turn the flame down or put it out before taking the pans off the burner. Carefully supervise cookings with fats or oil, since these types of foodstuff can result in a fire, if overheated. A B D Fig. 1 Energy saving advices To ensure maximum burner efficiency, it is strongly recommended that you use only pots and pans with a bottom fitting the size of the burner used, so that flame will not spread beyond the bottom of the vessel (see the table beside). It is also advisable, as soon as a liquid starts boiling, to turn down the flame so that it will barely keep the liquid simmering. · Use only pans or pots with flat bottom. C Burner Rapid Auxiliary minimum diameter 180 mm. 160 mm. Cleaning and Maintenance Disconnect the appliance from the electrical supply, before carrying out any cleaning or manteinance work. Never use abrasive cleaners Frequently wash the "caps" and the "crowns" with hot soapy water, carefully taking away any built-up of food. Before fitting the appliance ensure that the installation has the correct voltage for the appliance. Such a drop in pressure is caused by the following parameters: - maximum capacity of meter; - diameter and lenght of the tube in front and behind the meter; - section of transit of variuos tubes positioned on the circuit; - diameter of eventual connections. Fig. 2 2365 A) Ramp with ending nut B) Seal C) Adjustable connection 6 Electrical Connection The appliance is designed to be connected to 220 / 240 V monophase electricity supply. The connection must be carried out in compliance with the laws and regulations in force. check that the main fuse and the domestic installation can support the load (see the rating label); 2. check that the power supply is properly earthed in compliance with the current rules; 3. check the socket or the double pole switch used for the electrical connection can be easily reached with the appliance built in the forniture unit. This has to be provided with a proper plug, able to support the load marked on the identification plate. To connect the plug to the cable, follow the recommendation given in Fig. 3. If connecting the appliance directly to the electric system, it is necessary that you install a double pole switch between the appliance and the electricity supply, with a minimum gap of 3 mm. between the switch contacts and of a type suitable for the required load in compliance with the current rules. [. . . ] 5 7 Adaptation to different types of gas Replacing the burner injectors 1. 6), and replace them with the ones required for the type of gas in use (see Table 2). Town gas a) Auxiliary burner and semi-rapid burners: after fitting the nozzles ( lett. "B"), screw the provided grid filter "A" (Ø 10) on them; b) Rapid and Ultra-rapid burner burners: screw the provided grid filter assembly "C" (Ø 16) on it. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE AEG-ELECTROLUX EHG3901




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual AEG-ELECTROLUX EHG3901 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.