User manual AEG-ELECTROLUX EHS6610X 56D

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual AEG-ELECTROLUX EHS6610X 56D. We hope that this AEG-ELECTROLUX EHS6610X 56D user guide will be useful to you.


AEG-ELECTROLUX EHS6610X 56D : Download the complete user guide (211 Ko)

You may also download the following manuals related to this product:

   AEG-ELECTROLUX EHS6610X 56D (234 ko)
   AEG-ELECTROLUX EHS6610X 56D (275 ko)
   AEG-ELECTROLUX EHS6610X 56D (230 ko)
   AEG-ELECTROLUX EHS6610X 56D (269 ko)

Manual abstract: user guide AEG-ELECTROLUX EHS6610X 56D

Detailed instructions for use are in the User's Guide.

[. . . ] . 3 Operating Instructions 1 Safety instructions 3 Please comply with these instructions. If you do not, any damage resulting is not covered Directives: ­ 73/23/EEC dated 19. 02. 1973 Low Voltage Directive ­ 89/336/EEC dated 03. 05. 1989 EMC Directive inclusive of Amending Directive 92/31/EEC ­ 93/68/EEC dated 22. 07. 1993 CE Marking Directive Safety during use · Remove stickers and film from the glass ceramic. · There is the risk of burns from the appliance if used carelessly. · Cables from electrical appliances must not touch the hot surface of the appliance or hot cookware. [. . . ] Young children should be supervised to ensure that they do not play with the appliance. General safety · The appliance may only be installed and connected by trained, registered service engineers. 3 The countdown timer basically cannot be used if a cooking zone is switched on. 3 If a cooking zone is switched off, the timer function set is also switched off. Selecting a cooking zone Step 1. Touch Control panel once Display Pilot light of the first cooking zone flashes 2. Touch once Pilot light of the second cooking zone flashes 3. Touch once Pilot light of the third cooking zone flashes 4. Touch once Pilot light of the fourth cooking zone flashes 3 If the pilot light is flashing more slowly, the heat setting can be set or modified. 3 If other timer functions are set, after a few seconds the shortest remaining time of all the timer functions is displayed and the corresponding pilot light flashes. 10 Setting the time Step 1. Control panel Select Touch cooking zone or Indicator Pilot light for the cooking zone selected flashes 00 to 99 minutes After a few seconds the pilot light flashes more slowly. Control panel Select Touch cooking zone Indicator Pilot light of cooking zone selected flashes faster Time remaining is displayed The time remaining counts backwards to 00. The pilot light goes out. The Timer function for the selected cooking zone is switched off. Changing the time Step 1. Control panel Select Touch cooking zone or Indicator Pilot light of the selected cooking zone flashes faster Time remaining is displayed 01 to 99 minutes After a few seconds, the pilot light flashes more slowly. If possible, always place lids on the pans. Switch cooking zones off before the end of the cooking time, to take advantage of residual heat. Bottom of pans and cooking zones should be the same size. 13 Examples of cooking applications The information given in the following table is for guidance only. Ensure anti-shock protection through correct installation by a qualified electrician. · The appliance must be connected to the electrical supply by a qualified electrician. · · · · · Electrical Connection Before connecting, check that the nominal voltage of the appliance, that is the voltage stated on the rating plate, corresponds to the available supply voltage. The appliance also works perfectly on networks with AC220V~ or AC240V~. The hob is to be connected to the mains using a device that allows the appliance to be disconnected from the mains at all poles with a contact opening width of at least 3 mm, eg. A cable with minimum temperature rating of V90HT or one with a higher grade must be used as the mains connecting cable. The connecting links should be fitted according to the appropriate connection diagram. The cable connections must be made in accordance with regulations and the terminal screws tightened securely. Finally, the connecting cable is to be secured with the mains cable cleat and the covering closed by pressing firmly (lock into place). Before switching on for the first time, any protective foil or stickers must be removed from the glass ceramic surface. 1 WARNING! Risk of injury from electrical current. Loose and inappropriate plug and socket connections can make the terminal overheat. [. . . ] You agree that any replaced Appliances or parts become the property of Electrolux. This warranty does not apply to light globes, batteries, filters or similar perishable parts. Parts and Appliances not supplied by Electrolux are not covered by this warranty. Where you are within an Electrolux service area, this warranty covers the cost of transport of the Appliance to and from Authorised Service Centres of Electrolux and travelling costs for representatives of the Authorised Service Centre to and from your home or business. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE AEG-ELECTROLUX EHS6610X 56D




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual AEG-ELECTROLUX EHS6610X 56D will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.