User manual AEG-ELECTROLUX ER88892C

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual AEG-ELECTROLUX ER88892C. We hope that this AEG-ELECTROLUX ER88892C user guide will be useful to you.


AEG-ELECTROLUX ER88892C : Download the complete user guide (495 Ko)

You may also download the following manuals related to this product:

   AEG-ELECTROLUX ER88892C (464 ko)

Manual abstract: user guide AEG-ELECTROLUX ER88892C

Detailed instructions for use are in the User's Guide.

[. . . ] Tips and information about the economical and environmentally friendly use of the appliance are marked with the clover. A B Bean hopper lid Bean hopper (capacity 250 g) with shutter release mechanism C Grind adjustment collar D Grinding spout E Grind on demand button F Preparation mat (removable) G Burr shield H Conical burrs J Commercial size filter holder locator K Domestic size filter holder locator L Cord stuff (underside of appliance) M Non-slip rubber feet N Rating plate (underside of appliance) O Burr cleaning brush P Ground coffee container with lid If the appliance is used for purposes other than those intended or used incorrectly, no liability can be accepted for any damage that may be caused. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities or lack of experience and knowledge unless they have been given initial supervision or instruction concerning use of the appliance by a person responsible for their safety. Safety in cleaning and care Do not immerse the appliance in water or any other liquid unless recommended. [. . . ] Remove any foreign objects, such as small stones, from the coffee beans. Blocking or damage caused by foreign objects in the grinder might be excluded from the guarantee. Always operate the grinder with the ground coffee container properly inserted in the grinder. Do not place your hand in or near the burrs while the grinder is in operation. 0 To attach the bean hopper, position bean hopper onto the top of the motor base, push down and turn clockwise (see Fig. Having an even weight bearing down on the burrs is important to ensure a consistent grind. 0 Plug the power cord into a 220-240 V power outlet and switch the power on. Refer to the grind setting table in section , , Adjusting the Grind Setting" to assist you in selecting the correct grind level for the desired brewing method. Cleaning" section as these objects need to be removed immediately. You can grind coffee into a filter holder of any espresso coffee maker, or, for other brewing styles, into the ground coffee container (Fig. To grind coffee into a filter holder: 0 Position the filter holder into the filter holder locator (see Fig. To ensure the best results from the coffee grinder clean the bean hopper and conical burrs regularly. Ensure the coffee grinder is switched off and unplugged from the power outlet prior to cleaning. Do not immerse any part of the burr assembly in water or any other liquid. These marks do not affect the performance of the grinder or the taste of the coffee. 0 Remove the bean hopper from the motor base: push down and turn anti-clockwise, then lift off (see Fig. 0 Clean the motor base exterior using a damp soft sponge with mild detergent and wipe dry. 0 Wash the bean hopper and coffee container in warm soapy water, then rinse and dry. 0 Replace the top burr back into position in the grind adjustment collar. Ensure the marker on the top burr is aligned with the marker inside the grind adjustment collar and push firmly into place. If the coffee grinder is used frequently (every day), the burrs need to be cleaned every three weeks to ensure best performance of the coffee grinder. Regular cleaning helps the burrs achieve consistent grinding results, which is especially important when grinding coffee for espresso. [. . . ] To remove the top burr turn the grind adjustment collar in an anticlockwise direction until it stops (see Fig. Press and hold down the `UNLOCK' button at the rear of the motor base and with the other hand turn the grind adjustment collar anti-clockwise until it stops and the graphic line on the collar is aligned with the line on the motor base (see Fig. Lift out the top burr from the grind adjustment collar using the handle (see Fig. Once both burrs are cleaned, return the grind adjustment collar to its position in the motor base. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE AEG-ELECTROLUX ER88892C




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual AEG-ELECTROLUX ER88892C will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.