User manual AEG-ELECTROLUX ESL6350LO

[. . . ] Make sure that there is access to the mains plug after the installation. • Do not let persons, children included, with reduced physical sensory, reduced mental functions or lack of experience and knowledge use the appliance. They must have supervision or instruction for the operation of the appliance by a person who is responsible for their safety. • Keep children and pets away from the appliance door when it is open. Water connection • Make sure not to cause damage to the water hoses. [. . . ] If you use the combi detergent tablets, activate the multitab option. 6. 1 Adjusting the water softener Water hardness German degrees (°dH) 51 - 70 43 - 50 37 - 42 29 - 36 23 - 28 19 - 22 15 - 18 11 - 14 4 - 10 <4 French degrees (°fH) 91 - 125 76 - 90 65 - 75 51 - 64 40 - 50 33 - 39 26 - 32 19 - 25 7 - 18 <7 mmol/l Clarke degrees 64 - 88 53 - 63 46 - 52 36 - 45 28 - 35 23 - 27 18 - 22 13 - 17 5 - 12 <5 Water softener adjustment Manual Electronic 10 9 8 7 6 51) 4 3 2 12) 9. 1 - 12. 5 7. 6 - 9. 0 6. 5 - 7. 5 5. 1 - 6. 4 4. 0 - 5. 0 3. 3 - 3. 9 2. 6 - 3. 2 1. 9 - 2. 5 0. 7 - 1. 8 < 0. 7 2 1) 2 1) 21) 21) 21) 21) 1 1 1 12) 1) Factory position. 2) Do not use salt at this level. You must adjust the water softener manually and electronically. Manual adjustment Turn the water hardness dial to the position 1 or 2. ENGLISH 9 Electronic adjustment 1. until the , indicators start 5. • indicator continues to The flash. • The programme is completed. 1 Starting a programme without delay start 1. • If you want to start the ECO programme, close the appliance door. • If you want to set a different programme, press the button of the programme you want to set. The programme duration starts to decrease with steps of 1 minute. Reset function For some settings it is necessary that the appliance is in user mode. Press and hold, at the same time, and until the indicator comes on. Starting a programme with delay start 1. Set the programme. 12 www. electrolux. com again and again until the Press display shows the delay time you want to set (from 1 to 24 hours). • The display shows intermittently the programme duration and the delay time. • When the countdown is completed, the programme starts. 2. Cancelling the programme Do the Reset function. Make sure that there is detergent in the detergent dispenser before you start a new programme. At the end of the programme When the programme is completed, the display shows 0:00. Press the on/off button or wait for the Auto Off function to automatically deactivate the appliance. Important • Let the dishes become cold before you remove them from the appliance. • First remove the items from the lower basket, then from the upper basket. • There can be water on the sides and on the door of the appliance. Stainless steel becomes cool more quickly than the dishes. Opening the door while the appliance operates If you open the door, the appliance stops. When you close the door, the appliance continues from the point of interruption. Cancelling the delay start while the countdown operates Do the Reset function. When you cancel the delay start you have to set the programme and options again. 8. HINTS AND TIPS 8. 1 The water softener Hard water contains a high quantity of minerals that can cause damage to the appliance and bad washing results. The dishwasher salt keeps the water softener clean and in good conditions. This makes sure that the water softener uses the correct quantity of dishwasher salt and water. [. . . ] Press the on/off button to deactivate the appliance and to confirm the setting. TECHNICAL INFORMATION Dimensions Electrical connection Width / Height / Depth (mm) Refer to the rating plate. Voltage Frequency Water supply pressure Water supply 1) Capacity Power consumption Min. (bar / MPa) Cold water or hot water2) Place settings Left-on mode Off-mode 220-240 V 50 Hz (0. 5 / 0. 05 ) / (8 / 0. 8 ) max. [. . . ]