User manual AEG-ELECTROLUX ETN1001H KM100

[. . . ] If repairs become necessary, please contact our Customer Services or your dealer. Child Safety · Never leave children unsupervised when the appliance is in use. Safety during Operation This appliance should be used only for the domestic cooking, roasting and baking of food. · Be careful if connecting electrical appliances to sockets near this appliance. [. . . ] Set+Go function is displayed in the Select options window and can be activated. Heat+Hold function is displayed in the Select options window and can be activated. Warning beeps sound when steps which cannot be carried out are selected. Reset all settings to the factory settings (My Programmes too). ­ Set+Go ­ ­ Heat+Hold ­ ­ Time Extension Display Contrast Display Brightness Set language Buzzer Volume Key Tones Alarm/Error Tones Service ­ ­ 1 . . . . . 10 ­ ­ ­ ­ On Off On Off ECAIA207 V03IA003 24 Factory Settings electrolux 19 duces its brightness when the appliance is switched off to save energy. The value currently set appears in the display. 3 Between 22:00 and 6:00 the display re- To start Set+Go 1. The setting is changed. Everyday use of Basic Settings Set+Go The function Set+Go means you can set all settings for an oven function and then start it later. Example application: You prepare a dish in the morning and enter all necessary settings in the oven. Your child comes home at lunchtime, puts the dish in the oven, presses any key and the oven starts with your settings. Press key repeatedly until the "Set+Go" window appears. operating Set+Go, the Key Lock is active (see section Key Lock). Heat+Hold The function Heat+Hold keeps your prepared dish warm for 30 minutes, after the baking or roasting has ended. The residual heat present is used to continue the cooking process until the time set has elapsed (3 to 20 mins. ). Duration and End Time combined 2 Using residual heat with the Key Lock The key lock protects all functions set from accidental changes. Press key repeatedly until the "Key Lock" window appears. 3 Duration 1. 5. and End Time can be used simultaneously, if the oven is to be switched on and off automatically at a later time. Press key repeatedly until the "Duration/End Time" window appears. Using the Duration function, set the time required for cooking the dish, e. g. : 1 hour. Using the End Time function, set the time at which the dish is to be ready, e. g. : 14:05. 3. After the appliance is switched off, the Key Lock is automatically cancelled. Child Lock for the oven As soon as the Child Lock child safety device is activated, the oven cannot be operated. Press and keys at the same time until a message appears in the display. Press and keys at the same time until a message appears in the display. [. . . ] If there is no neutral wire on the domestic supply side, please order transformer R07 with order number 940 304189 (2-phase). The installation must be carried out using a cable with a plug or, for a domestic installation, a separator with a contact opening of at least 3mm is required which also separates all poles of the appliance from the mains in accordance with NIN 2000. For a direct connection a cable length of at least 120 cm is required. Connection diagram 400V 1 When installing next to wood furnaces, Phase definitions: L1, L2, L3 (or R, S, T) 2. [. . . ]