User manual AEG-ELECTROLUX ETN12211V

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual AEG-ELECTROLUX ETN12211V. We hope that this AEG-ELECTROLUX ETN12211V user guide will be useful to you.


AEG-ELECTROLUX ETN12211V : Download the complete user guide (393 Ko)

You may also download the following manuals related to this product:

   AEG-ELECTROLUX ETN12211V (423 ko)

Manual abstract: user guide AEG-ELECTROLUX ETN12211V

Detailed instructions for use are in the User's Guide.

[. . . ] Types of salt that are not specified for dishwashers can cause damage to the water softener. ⷠFill the appliance with salt before you start a washing programme. Remaining salt in the appliance can cause corrosion or make a hole in the bottom of the appliance. ⷠDo not fill the rinse aid dispenser with other products than the rinse aid, (dish- Make sure that the spray arms can move freely before you start a washing programme. [. . . ] Disconnect the mains plug from the mains socket before the replacement of the internal lamp. to discard the appliance · To prevent the risk of injury or damage: ­ Disconnect the mains plug from the mains socket. ⷠIf an accident occurs with these detergents, contact immediately a physician. ⷠIf the detergent gets into the mouth, contact immediately a physician. ⷠIf the detergent gets into the eyes, contact immediately a physician and clean the eyes with water. ⷠKeep dishwasher detergents in a safe area and out of children touch. ⷠDo not keep the appliance door open when there is detergent in the detergent dispenser. ⷠFill the detergent dispenser only before you start a washing programme. 1) After you fill the container, the salt indicator can stay on for some hours. This does not have an unwanted effect on the operation of the appliance. 1) When the salt container and/or the rinse aid dispenser are empty, the related indicators do not come on while a washing programme operates. Remove the spilled rinse aid with an absorbent cloth to prevent too much foam during the washing programme. You can set the rinse aid dosage between position 1 (lowest dosage) and position 4 (highest dosage). Use of detergent To help the environment, do not use more than the correct quantity of detergent. If the washing programme has a prewash phase, put a small quantity of detergent on the inner part of the appliance door. If you use the detergent tablets, put the tablet in the detergent dispenser 1 . Be sure that these tablets are applicable for the water hardness in your area (refer to the instructions on the packaging of the products). activate or deactivate the multitab function before the start of a washing programme. You cannot activate or deactivate the function when a washing programme operates. ­ When you activate the multitab function, it stays on until you deactivate it. When the washing programme is completed, adjust the water softener to the water hardness in your area. Do not put in the appliance items that can absorb water (sponges, household cloths). [. . . ] The display shows two horizontal status bars and the indicator of the programme button comes on. Make sure that there is detergent in the detergent dispenser before you start a new washing programme. For better drying results, keep the appliance door ajar for some minutes. remove the items from the baskets · Let the dishes become cold before you remove them from the appliance. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE AEG-ELECTROLUX ETN12211V




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual AEG-ELECTROLUX ETN12211V will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.