User manual AEG-ELECTROLUX EWF14785W

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual AEG-ELECTROLUX EWF14785W. We hope that this AEG-ELECTROLUX EWF14785W user guide will be useful to you.


AEG-ELECTROLUX EWF14785W : Download the complete user guide (922 Ko)

You may also download the following manuals related to this product:

   AEG-ELECTROLUX EWF14785W (923 ko)

Manual abstract: user guide AEG-ELECTROLUX EWF14785W

Detailed instructions for use are in the User's Guide.

[. . . ] The clover leaf indicates tips and information on the economical and environmentallyresponsible use of the unit. This user information contains information on remedying any faults which may occur, see the section "What to do if . . . ". 2 Contents Instructions for use . 5 5 6 6 7 7 7 8 8 9 10 11 11 11 11 12 13 13 13 13 14 14 15 16 17 18 18 19 20 20 21 22 23 23 24 24 24 25 25 25 26 26 27 27 30 31 32 33 34 Setting up and connection instructions . 47 47 47 47 47 47 4 Instructions for use 1 Safety The safety of ELECTROLUX electrical appliances conforms to the recognised technical regulations and the legislation covering the safety of appliances. However, as manufacturers, we still regard it as our responsibility to inform you of the following safety information. [. . . ] If you selected RINSE HOLD (Spülstopp, Arrêt cuve pleine), the indicator next to the button START/ PAUSE (Marche/Pause) flashes. After a rinse hold, it is first necessary to pump off the water: ­ Press either the button START/PAUSE (Marche/Pause) (water is pumped off and the washing is spun according to the program which has just run; after pressing the button START/PAUSE (Marche/Pause) again, the spin speed can also still be changed during spinning), or ­ first turn the programme selector to OFF (Aus, Arrêt). Then turn the program selector to PUMP OUT (Pumpen, Vidange) and press the button START/PAUSE (Marche/Pause) (water is pumped off without spinning) or ­ first turn the programme selector to OFF (Aus, Arrêt). Then turn the program selector to SPIN (Schleudern, Essorage) or SHORT SPIN (Schonschleudern, Essorage Délicat) and press the button START/ PAUSE (Marche/Pause) (water is pumped off and the washing is spun or gently spun). After the end of this program step, the indicator END (Ende, Fin) lights up. As soon as the indicator DOOR (Tür, Porte) lights up green, the filling door can be opened. After washing, pull out the washing detergent drawer slightly so that it can dry out. Only lean the door against the washing machine so that the latter can air out. If the display OVER DOSING (Überdosiert, Surdosage) lights up, too much washing detergent was used in the washing program just ended. During the next wash, pay attention to the dosing information of the washing detergent manufacturer and pay attention to the filling quantity! 3 Attention!If the washing machine is not used for a long time: Close the water tap and disconnect the washing machine from the electricity mains. The button START/PAUSE (Marche/ Pause) was not pressed for long enough. Cancel the child lock (see section "Child Safety Feature"). Fault code E40 appears. Restart indicator MAIN WASH (Haupt- The filling door is not correctly closed. Unscrew the hose from the water tap, remove the filter and clean it under running water. Water tap is blocked with limescale or Check water tap and have it repaired is faulty. if necessary. 27 Problem Possible Cause Remedy Remove transport safeguard as indiThe transport safeguard has not been cated in the instructions for installaremoved. Adjust in accordance with the installation and connection instructions. Check the laying of the drainage hose and eliminate the bend if necessary, or clean the solution pump and, if required, remove foreign bodies from the pump housing. Meter the detergent exactly in accordance with the manufacturer's information. Stop the program, remove washing from the filling door, start a new program. Shut the emergency drain hose off properly (see section "Performing an Emergency Drain"). Call your aftersales service if the emergency drain hose is not water-tight. [. . . ] · In the case of less than 1bar: Unscrew the intake hose on the unit side on the inlet solenoid valve and remove the flow regulator (to do this, remove the filter with pointed pliers and remove the rubber washer behind). Replace the filter. 40 Water Inflow A pressure hose 1. 5m in length is supplied. If a longer inflow hose is required, only a VDEapproved, complete set of hoses with fitted hose screw connections offered by our Customer Service is permissible. ­ Sets of hoses in lengths of 2. 2m, 3. 5m and 5m are available for washing machines without AquaControl. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE AEG-ELECTROLUX EWF14785W




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual AEG-ELECTROLUX EWF14785W will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.