User manual AEG-ELECTROLUX F50863U-M

[. . . ] To ensure optimal and regular performance of your appliance please read this instruction manual carefully. It will enable you to navigate all processes perfectly and most efficiently. To refer to this manual any time you need to, we recommend you to keep it in a safe place. We wish you much joy with your new appliance. The following symbols are used in this user manual: Important information concerning your personal safety and information on how to avoid damaging the appliance. [. . . ] Once this function is selected (indicator light illuminated) it will remain active also for the following washing programmes. With the use of the "Multitab function", the cycle durations may change. In this case, in the digital display, the indication of the running time of the programme is automatically updated. Once the programme is running, the "Multitab function " can NO longer be changed. If you want to exclude the "Multitab function " you have to cancel the programme setting and then deactivate the "Multitab function ". In this case you have to set a washing programme (and desired options) again. Activation/deactivation of the Multitab function Simultaneously press and hold the two Multitab buttons (D and E), until the "Multitab function" indicator light illuminates. To deactivate the function press the same buttons again until the "Multitab function" indicator light turns off. · The activation/deactivation of the rinse aid dispenser can only be possible with the "Multitab function" active. Press simultaneously buttons B and C, until the lights of buttons A , B, and C start flashing. Press button B, the lights of buttons A and C turn off while the light of button B goes on flashing. The digital display indicates the current setting: = Rinse aid dispenser deactivated. Washing programmes 23 = Rinse aid dispenser activated. 4. The selection of the washing programme and delay start can also occur with the door closed. Keep in mind that in this way, once a washing programme button is pressed you have ONLY 3 seconds in which you can choose another programme or select a delay start, after which the selected programme will start automatically. Cancelling the "delay start" and / or a washing programme · To cancel a delay start in progress you have to reset the dishwasher. · Cancelling a delay start involves also the cancelling of the washing programme set. If a new washing programme is to be selected, check that there is detergent in the detergent dispenser. Interrupt or cancel a washing programme in progress ONLY if it's absolutely necessary. Interrupt a washing programme in progress: · Open the dishwasher door; the programme will stop. Close the door; the programme will start from the point at which it was interrupted. Press the On/Off button again; the programme will start from the point at which it was interrupted. End of the washing programme · The dishwasher will automatically stop. 26 Unloading the dishwasher · · 1. Open the dishwasher's door, leave it ajar and wait a few minutes before removing the dishes; in this way they will be cooler and the drying will be improved. Unloading the dishwasher · Hot dishes are sensitive to knocks. [. . . ] The dishwasher features fill and drain hoses which can be turned either to the left or the right to suit the installation by means of the locknut. The locknut must be correctly fitted to avoid water leaks. 36 (Attention!NOT all models of dishwashers have fill and drain hoses provided with locknut. If the machine is connected to new pipes or pipes which have not been used for a long time, you should run the water for a few minutes before connecting the inlet hose. [. . . ]