User manual AEG-ELECTROLUX F99705VI1P

[. . . ] U dient het juiste programma in te stellen en te starten voor het type lading en de mate van vervuiling. €¢ U dient het juiste programma in te stellen voor het type lading en de mate van vervuiling. €¢ Het programma van toepassing is op het type lading en de mate van bevuiling. We have created it to give you impeccable performance for many years, with innovative technologies that help make life simpler features you might not find on ordinary appliances. [. . . ] 2 How to set an option The option list will show only the options applicable to the currently selected programme. However you can deactivate the rinse aid dosage by setting the rinse aid level at 0. 5 AutoOpen This option is automatically activated when you select the programme ECO and it is not possible to select this option with other programmes. €¢ While the drying phase operates, a device opens the appliance door and keeps it ajar. Com • At the end of the programme, the device retracts but the appliance door can remain ajar or retract without closing. Do not try to close the appliance door while the device keeps the door ajar. BEFORE FIRST USE The first time you activate the appliance it is necessary to set the language. €¢ Scroll the list of available languages for a new language and press OK to confirm. Make sure that the current level of the water softener agrees with the hardness of the water supply. Start a programme to remove any processing residuals that can still be inside the appliance. When you start a programme, the appliance can take up to 5 minutes to Water hardness German degrees (°dH) 47 - 50 43 - 46 37 - 42 29 - 36 23 - 28 19 - 22 15 - 18 11 - 14 4 - 10 French degrees (°fH) 84 - 90 76 - 83 65 - 75 51 - 64 40 - 50 33 - 39 26 - 32 19 - 25 7 - 18 mmol/l 8. 8 Clarke degrees 58 - 63 53 - 57 46 - 52 36 - 45 28 - 35 23 - 27 18 - 22 13 - 17 5 - 12 Water softener level 10 9 8 7 6 5 1) 4 3 2 recharge the resin in the water softener. 1 The water softener The water softener removes minerals from the water supply, which would have a detrimental effect on the washing results and on the appliance. The water softener should be adjusted according to the hardness of the water in your area. Your local water authority can advise you on the hardness of the water in your area. It is important to set the right level of the water softener to assure good washing results. 7 Clarke degrees <5 Water softener level 1 2) 2) Do not use salt at this level. The salt is used to recharge the resin in the water softener and to assure good washing results in the daily use. 3 The rinse aid dispenser The rinse aid helps to dry the dishes without streaks and stains. You can set the released quantity of rinse aid between level 1 (minimum quantity) and level 6 (maximum quantity). Level 0 will deactivate the rinse aid dispenser and no rinse aid will be released. Turn the cap of the salt container clockwise to close the salt container. [. . . ] ENGLISH 41 • If you regularly use short duration programmes, these can leave deposits of grease and limescale inside the appliance. To prevent this, we recommend to run long duration programmes at least 2 times per month. TROUBLESHOOTING If the appliance does not start or it stops during operation. Before you contact an Authorised Service Centre, check if you can solve the problem by yourself with the help of the information in the table. [. . . ]