User manual AEG-ELECTROLUX L12830

[. . . ] 132984010. qxd 24/06/2005 16:30 Pagina 1 LAVAMAT TURBO 12830 Washer-dryer Instruction Booklet 12830 1200 900 700 500 RINSE HOLD TIME SAVER DRYING TIME DELAY START REMAINING TIME PREWASH WASH RINSE EXTRA RINSE SPIN DRYING PREWASH STAIN SENSITIVE START PAUSE END DELICATE SPIN SPIN DRAIN SOFTENERS OFF 95 COTTONS LINEN ECONOMY 60 50 40 DEL. RINSE WOOL SILK COLD 30 40 COLD 30 40 DOOR DELICATES 30 DRYING 60 EASY CARES 50 40 EASY IRON DRYING 40 PERFEKT IN FORM UND FUNKTION 132984010. qxd 24/06/2005 16:30 Pagina 2 Dear customer, Please read these operating instructions carefully and pay particular attention to the safety notes indicated in the first pages. We recommend that you keep this instruction booklet for future reference and pass it on to any future owners. The warning triangle and/or the key words (Warning!, Caution!) emphasize information that is particularly important for your safety or correct functioning of the appliance. [. . . ] By depressing these 2 buttons again the acoustic signal is reactivated. 27 132984010. qxd 24/06/2005 16:30 Pagina 28 How to wash Starting the programme 1. If the Delay Start option has been selected the programme will start at the end of the countdown. At the start of the programme, if the "END" light blinks for few seconds, the acoustic signal sounds and on the display appears E40, that indicates that the door is open. If the delay start option has been selected, the machine starts its countdown, in hours, which will appear on the display. During this period it is possible to load other laundry or cancel the delay time. Press the DELAY START button until on the display appears 0', if you wish to cancel it. Press the START/ PAUSE button again to let the programme restart. Programme progress display By selecting the wash programme, the pilot lights corresponding to the various phases making up the programme come on. After the machine has started, only the running phase pilot light stays on. PREWASH WASH RINSE EXTRA RINSE SPIN DRYING END DOOR Display The time to the end of the programme decreases minute by minute and appears on the display. REMAINING TIME 28 132984010. qxd 24/06/2005 16:30 Pagina 29 How to wash At the end of the programme The machine stops automatically. The END light comes on in the programme progress display, the START/PAUSE light is off and the DOOR light is green. If the RINSE HOLD option has been selected the RINSE HOLD light remains lit and the DOOR light is red and the door is blocked to indicate that the water must be emptied out before opening the door either To empty out water: · select the DRAIN programme to empty out the water without spinning. · select the SPIN SPEED and depress the START/PAUSE button; Warning!The programme selector dial must be turned first to O/OFF and then to the DRAIN, SPIN or DELICATE SPIN programmes. At the end of the programme the selector dial must be turned to position O/OFF. Check that the drum is empty so as to avoid any forgotten items being damaged in a subsequent wash (e. g. Leave the door open to prevent the formation of mildew and unpleasant smells. 29 132984010. qxd 24/06/2005 16:30 Pagina 30 How to wash Automatic washing and drying (NON-STOP programme) Warning!For NON-STOP programmes, it is also essential not to exceed the maximum load sizes of 3 kg for cotton and 2 kg for easy cares. Do not use a dosing device when carrying out automatic washing and drying programme. If possible, do not select a spin speed lower than that proposed by the appliance to avoid a too long drying time so saving energy. When automatically washing and drying it is not possible to select a spin speed lower than 900 r. p. m. load - cottons 3 kg - easy cares 2 kg During the drying programme the water tap must be open and the drain hose must be correctly positioned. If you wish to carry out the timed drying press the relevant button until the time you want appears in the display. At the end of the cycle turn the programme selector dial to O/OFF and remove the laundry. 30 132984010. qxd 24/06/2005 16:30 Pagina 31 Programme chart Wash programmes Wash Temp. [. . . ] Do not connect to a hot water supply. A P0352 Water drainage TThis appliance is designed to be permanently plumbed into your home's drainage system using one of the following methods. Firstly form a hook in the end of the drain hose using the "U" piece" supplied. P1199 U piece supplied 38 mm (11. 2) standpipe diameter 30 cm (12") Place the drain hose into your standpipe, which should have an internal diameter of approximately 38mm thus ensuring there is an air break between the drain hose and standpipe. P1074 52 132984010. qxd 24/06/2005 16:30 Pagina 53 Installation When discharging into a 3 pin standpipe ensure that the top of the standpipe is no more than 90 cm (35. 4'') and no less than 60 cm (23. 6'') above floor level. An additional drain hose and joining piece is available from your local Service Force Centre. If the outlet spigot has not been used before, remove any blanking plug that may be in place. [. . . ]