User manual AEG-ELECTROLUX L60699

[. . . ] 132997850·d. qxd 28-05-2001 10:13 Pagina 1 LAVAMAT 60699 Der umweltschonende Waschvollautomat The environmentally friendly washing machine Benutzerinformation Instruction booklet AUS ERFAHRUNG GUT 132997850·gb. qxd 28-05-2001 10:18 Pagina 46 Dear customer, Please read these operating instructions carefully and pay particular attention to the safety notes indicated in the first pages. We recommend that you keep this instruction booklet for future reference and pass it on to any future owners. The warning triangle and/or the key words (Warning!, Caution!) emphasize information that is particularly important for your safety or correct functioning of the appliance. This symbol guides you, step by step, in the operation of the appliance. [. . . ] The display shows the duration of the programme. F D C B A 30 40 30 40 40 40 95 E 60 50 40 30 60 50 Select the desired options depending on the degree of soil of the laundry. The corresponding light comes on. Select the spin speed or RINSE HOLD option It is possible to select a lower spin speed by means of the relevant button; the light corresponding to the selected speed comes on. Selecting the option (RINSE HOLD) the laundry is left immersed in the final rinse water. If the spin speed is not reduced, the final spin speed will be as follows: - cottons 1000 r. p. m. - wool (hand washing) 900 r. p. m. 1000 900 700 400 66 132997850·gb. qxd 28-05-2001 10:18 Pagina 67 How to wash EXTRA RINSE This appliance is designed for saving water. However, for people with a very delicate skin (allergic to detergents) it may be necessary to rinse the laundry using an extra quantity of water (extra rinse). The extra rinse is available only with the cotton, synthetics or delicate programme. Selection of the EXTRA RINSE option Press simultaneously the buttons and for about 2 seconds: the light comes on in the programme progress display. To remove it press the buttons and again until the light comes off. Select the DELAY START option To delay starting of a programme, press the DELAY START button before starting the machine. The figures corresponding to the selected delay will be displayed for about 3 seconds, after which the duration of the selected programme will appear on the display. If the button (SOAK) has been pressed the selected delay will correspond to the soak time. If no delay time is selected the soak programme will last about 30 minutes. When the START/PAUSE button is pressed, the selected delay will appear again on the display and the machine starts its countdown. 67 132997850·gb. qxd 28-05-2001 10:18 Pagina 68 How to wash Starting the programme 1. If the Delay Start option has been selected the programme will start at the end of the countdown. If the door light is red and flashing at the start of the programme it indicates that the door is open. If the delay start option has been selected, the machine starts its countdown, in hours, which will appear on the display. During this period it is possible to load other laundry, to modify or cancel the delay time. · Modify or cancel the delay time: press the START/PAUSE button. Press the DELAY START button until the time required appears on the display, or 0h, if you wish to cancel it. Press the START/ PAUSE button again. Programme progress display By selecting the wash programme, the pilot lights corresponding to the various phases making up the programme come on. After the machine has started, only the running phase pilot light stays on. Display The time to the end of the programme decreases minute by minute and appears on the display. At the end of the programme The machine stops automatically. The END light comes on in the programme progress display. 68 132997850·gb. qxd 28-05-2001 10:18 Pagina 69 How to wash If the light (OVERDOSAGE) comes on it indicates that too much detergent has been used. At the next wash carefully follow the detergent manufacturer's instructions. [. . . ] Carefully remove the right-hand bag (1) then the left-hand bag (2) by pulling them towards the centre of the machine. Set the machine upright and remove the two remaining bolts from the back. Pull out the three plastic spacers from the holes into which the bolts were fitted. Plug the open holes with the plugs which you will find in the plastic bag containing the instruction booklet. [. . . ]