User manual AEG-ELECTROLUX LAVW1449

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual AEG-ELECTROLUX LAVW1449. We hope that this AEG-ELECTROLUX LAVW1449 user guide will be useful to you.


AEG-ELECTROLUX LAVW1449 : Download the complete user guide (716 Ko)

You may also download the following manuals related to this product:

   AEG-ELECTROLUX LAVW1449 (723 ko)
   AEG-ELECTROLUX LAVW1449 (719 ko)
   AEG-ELECTROLUX LAVW1449 (616 ko)
   AEG-ELECTROLUX LAVW1449 (620 ko)
   AEG-ELECTROLUX LAVW1449 (711 ko)
   AEG-ELECTROLUX LAVW1449 (601 ko)
   AEG-ELECTROLUX LAVW1449 (806 ko)
   AEG-ELECTROLUX LAVW1449 (612 ko)

Manual abstract: user guide AEG-ELECTROLUX LAVW1449

Detailed instructions for use are in the User's Guide.

[. . . ] LAVAMAT W 1450 ELECTRONIC Washing Machine User Information Dear customer, Please read this user information carefully. In particular, pay attention to the section "Safety" on the first pages. Pass it on to any subsequent owners of the unit. 1 Points which are necessary for your safety or which are important for the unit's functional capability are highlighted by a warning triangle and/or signal words (Warning!, Caution!, Attention!). . . . 3 2 After this symbol you will find detailed information on operation and practical use of the unit. [. . . ] Remove The filter in the threaded inthe plug from the mains, unlet hose fitting is blocked. screw the hose from the water tap, take out the filter and wash it in running water. First turn the programme selector to OFF (ARRET/UIT), then set the desired programme to the exact position. Remove the transit bolts/bars as described in the Installation and Connection instructions. Adjust the screw feet as described in the Installation and Connection instructions. The END (FIN/EINDE) light flashes 8 times and at the same time an acoustic signal sounds 8 times. The programme selector has not clicked into place correctly. The transit bolt/bars were not removed. The washing machine vibrates when operating or is noisy. There is very little washing in Operation is not affected by the drum (for example, only this. Water could not be drained completely before spinning, because the outlet hose has got a kink in it or the drain pump is blocked. Check the positioning of the outlet hose and even out any kinks if necessary or clean the drain pump and remove any foreign matter that might be in the pump housing. The main wash deterFollow the manufacturer's Probably too much detergent gent solution produces instructions exactly, when was used. measuring out detergent. 31 Instructions for use Problem Possible Cause The threaded inlet hose fitting is not watertight. Remedy Screw the inlet hose in firmly. The outlet hose is not water- Check the outlet hose and tight. Close the cover properly. Stop the programme and Washing has been trapped in free the washing from the the door. Connect the emergency drain hose properly (see Section "Emergency Drain Procedure"). In the case of easy-care fabrics, select the EASY IRON (FACILE A REPASSER/STRIJKVRIJ) programme. The emergency drain hose is not connected properly or is leaking. Conditioner is not drawn in, the æ compartment for additives is full of water. The conditioner insert is not correctly set into the additive compartment or is clogged. Washing is heavily creased. Probably too much washing has been put in the drum. The washing has not been spun as dry as usual. The washing was not able to Always load the drum as ful be distributed evenly in the as possible with a combinadrum prior to spinning. tion of large and small items. 32 Instructions for use Problem Possible Cause There is a kink in the outlet hose. The END (FIN/EINDE) light flashes twice and at the same time an acoustic signal sounds twice. The maximum pump height (outlet height 1m from the washing machine's installation surface) has been exceeded. Contact Customer Service, who will be able to provide an adaptor kit for pump lifts greater than 1m as a special accessory. Wait until the wash programme has ended, the DOOR (PORTE/DEUR) light has gone off and the END (FIN/EINDE) light has come on. If the door has to be opened: Door is locked due to high water level or high tempera- Turn the programme knob to OFF (ARRET/UIT); turn the ture. After the water has drained, the door can be opened. The door cannot be opened when the washing machine is switched on. The indicator lights START/PAUSE (MARCHE/PAUSE, START/PAUZE) and DOOR (PORTE/DEUR) come on. 33 Instructions for use Problem Possible Cause Remedy Programme continues, when the power failure is over. If the washing is to be removed during the power failure: Possibly interruption of power by the power supplier. [. . . ] If, during the guarantee period, repairing the same defect repeatedly is not conclusive, or if the repair costs are considered disproportionate, in agreement with the consumer, the defective appliance may be replaced with another appliance of the same value. In this event, we reserve the right to ask for a financial contribution calculated according to the length of time it has been used. A repair under guarantee does not mean that the normal guarantee period will be extended nor that a new guarantee period begins. We give a twelve month guarantee for repairs, limited to the same defect. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE AEG-ELECTROLUX LAVW1449




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual AEG-ELECTROLUX LAVW1449 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.