User manual AEG-ELECTROLUX T56837

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual AEG-ELECTROLUX T56837. We hope that this AEG-ELECTROLUX T56837 user guide will be useful to you.


AEG-ELECTROLUX T56837 : Download the complete user guide (5136 Ko)

You may also download the following manuals related to this product:

   AEG-ELECTROLUX T56837 (661 ko)

Manual abstract: user guide AEG-ELECTROLUX T56837

Detailed instructions for use are in the User's Guide.

[. . . ] To ensure optimal and regular performance of your appliance please read this instruction manual carefully. It will enable you to navigate all processes perfectly and most efficiently. To refer to this manual any time you need to, we recommend you to keep it in a safe place. We wish you much joy with your new appliance. The following symbols are used in this user manual: Important information concerning your personal safety and information on how to avoid damaging the appliance. [. . . ] Display shows elapsing cycle time or delay time if activated. Changing programme To change a programme which has been selected by mistake once the programme has started, first turn the programme selector to OFF UIT and then reset the programme. The programme can no longer be changed directly once the programme has started. If nevertheless there is an attempt to change the programme on the programme knob, the programme progress display and the maintenance indicators flash. If an option button (excluding the BUZZER ZOEMER button) is pressed, Err appears in the multidisplay. The drying programme is not however affected by this (laundry protection). Putting in extra items or taking items out before end of programme 1. Press the START PAUSE START PAUZE button to continue the drying cycle. Drying cycle complete / removing laundry Once the drying cycle is complete, display shows a blinking "0". If the BUZZER ZOEMER button has been pressed, an acoustic signal sounds intermittently for about one minute. 18 Daily use The drying cycles are automatically followed by an anti-crease phase which lasts around 30 minutes. (The laundry should be taken out towards the end of the anti-crease phase at the latest to prevent creases from forming. ) If LONG ANTICREASE ANTIKREUK LANG function has been selected, the anti-crease phase is lengthened by 60 minutes. After each drying cycle: - Clean the micro-fine filter and fine filter - Drain the condensed water container (See chapter "Care and cleaning". ) 5. Close the door. Care and cleaning 19 Care and cleaning Cleaning fluff filter The filters collect all the fluff which accumulates during drying. To ensure that the dryer works perfectly, the fluff filters (micro-fine filter and fine strainer) must be cleaned after every drying cycle. Lime in the water or cleaning agents may form a barely visible lining on the inside of the drum. The degree to which the laundry has been dried is then no longer detected reliably. vinegar-based cleaner) to wipe down the inside of the drum and drum ribs. 24 Care and cleaning Clean operating screen and housing CAUTION!Do not use furniture cleaners or aggressive cleaning agents to clean the machine. Use a damp cloth to wipe down the operating screen and housing. What to do if . . . 25 What to do if . . . Troubleshooting by yourself If, during operation, the error code E. . . plus number or letter) appears on the LCD: Switch the machine off and on again. Press the START PAUSE START PAUZE button If the error is still displayed, please inform your local Service Force Centre and quote the error code. Problem Possible cause Remedy Mains plug is not plugged in or fuse Plug in at mains socket. Have you pressed the START PAUSE Press the START PAUSE START PAUZE button again. Conductance of water at installation site differs from standard setting of machine. Select a different programme the next time you dry (see "Programme chart" chapter). Re-programme standard setting for degree of drying (see `Programming options' chapter). [. . . ] To do this, insert a thin screwdriver into the slots as shown in the illustration, press downwards slightly and pry out the cover plates. Use an appropriate tool and exert pressure to unfasten locking block D from the snap-on fixture, take out and re-insert on the other side having rotated the block through 180°. Unscrew hinge A from the loading door, rotate through 180°, re-insert on the opposite side and screw down. 4. A B A C D C 5. Installation 6. 7. 33 Re-insert cover plates B and C on the opposite site having first rotated them through 180°. Unscrew cover plates E from the E front of the machine, rotate through 180°, screw on the oppoG site side. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE AEG-ELECTROLUX T56837




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual AEG-ELECTROLUX T56837 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.