User manual AEG-ELECTROLUX TF1108G

[. . . ] When contacting Service, ensure that you have the following data available. Warning / Caution-Safety information General information and tips Environmental information Subject to change without notice. ENGLISH 3 1. SAFETY INSTRUCTIONS In the interest of your safety and to ensure the correct use, before installing and first using the appliance, read this user manual carefully, including its hints and warnings. To avoid unnecessary mistakes and accidents, it is important to ensure that all people using the appliance are thoroughly familiar with its operation and safety features. Save these instructions and make sure that they remain with the appliance if it is moved or sold, so that everyone using it through its life will be properly informed on appliance use and safety. [. . . ] Set default temperature: • -18°C for the freezer The temperature indicator shows the set temperature. After a power failure the set temperature remains stored. 2. 8 DrinksChill mode The DrinksChill mode is to be used to set an acoustic alarm at the preferred time, useful for example when a recipe requires to cool down a mixture for a certain period of time, or when a reminder is needed in order not to forget the bottles placed in the freezer for fast cooling. Press the Temperature colder button and Temperature warmer button to change the Timer set value from 1 to 90 minutes. At the end of the countdown the DrinksChill indicator flashes and an audible alarm sounds: 2. 5 Ice maker function The ice maker is switched on at delivery and starts up automatically when the appliance is connected to water and power supplies. The OFF icon is shown when the ice maker is deactivated. 2. 6 EcoMode For optimal food storage select the EcoMode . To switch on the function: ENGLISH 7 1. Remove any drinks contained in the freezer compartment. Press the DrinkChill button to switch off the sound and terminate the function. It is possible to deactivate the function at any time during the countdown: 1. It is possible to change the time during the countdown and at the end by pressing the Temperature colder button and the Temperature warmer button. To reset the alarm: 1. The freezer temperature indicator shows the highest temperature reached for a few seconds. The alarm indicator continue to flash until the normal conditions are restored. 2. 10 Door open alarm An acoustic alarm will sound if the door is left open for a few minutes. Never use detergents, abrasive powders, highly perfumed cleaning products or wax polishes to clean the interior as this will damage the surface and leave a strong odor. Clean the condenser (black grill) and the compressor at the back of the appliance with a brush. This operation will improve the performance of the appliance and save energy consumption. When moving the cabinet, lift it by the front edge to avoid scratching the floor. Many proprietary kitchen surface cleaners contain chemicals that can attack/damage the plastics used in this appliance. For this reason use a soft cloth rinsed in warm water and neutral soap emulsion for cleaning external surfaces. 5. 3 Defrosting of the freezer The freezer compartment of this model, on the other hand, is a "no frost" type. This means that there is no buildup of frost when it is in operation, neither on the internal walls nor on the foods. The absence of frost is due to the continuous circulation of cold air inside the compartment, driven by an automatically controlled fan. 5. 4 Periods of non-operation When the appliance is not in use for long periods, take the following precautions: 1. When the ice maker starts again, do not use ice produced during the first day to ensure fresh taste. If the cabinet will be kept on, ask somebody to check it once in a while to prevent the food inside from spoiling in case of a power failure. 12 www. electrolux. com 5. 5 Cleaning the ventilation grille The ventilation grille can be removed for washing. Make sure the door is open and then: • Loosen the upper edge of the grille by pulling outward/downward. [. . . ] Connect the wire coloured blue to the terminal either marked with the letter “N“ or coloured black. Connect the wire coloured brown to the terminal either marked with the “L“ or coloured red. Check that no cut, or stray strands of wire is present and the cord clamp 4 is secure over the outer sheath. Make sure the electricity supply voltage is the same as that indicated on the appliance rating plate. [. . . ]