User manual AEG-ELECTROLUX TRI ETN1201H KM ELUX

[. . . ] correct use · This dishwasher is only intended for washing household utensils suitable for machine washing. Knives and other items with sharp points must be loaded in the cutlery basket with their points down or placed in a horizontal position in the upper basket. Avoid opening the door whilst the appliance is in operation, hot steam may escape. ⷠDo not take any dishes out of the dishwasher before the end of the washing cycle. [. . . ] If the handles protrude from the bottom of the basket, obstructing the lower spray arm, load the cutlery with the handles facing upwards. To make loading of the cutlery basket easier, lower the cutlery basket handle. The rows of prongs in the lower basket can lie flat to allow you to load pots, pans and bowls. If the size and dimensions of the cutlery do not allow the use of the grids, they can be easily hidden. The cutlery basket is in two parts which can be separated to give greater loading flexibility. To separate the two parts, slide them horizontally in opposite directions and pull them apart. Arrange items on and underneath the cup racks so that water can reach all surfaces. For glasses with long stems (according to the size and dimensions), set the glass holder to the left or right position. The central rows of prongs can be easily lowered to improve loading flexibility. Before closing the door, ensured that the spray arms can rotate freely. Adjusting the height of the upper basket If washing very large plates you can load them in the lower basket after moving the upper basket to the higher position. The dishes should therefore be allowed to cool down before removing from the appliance. ⷠEmpty the lower basket first and then the upper one; this will avoid water dripping from the upper basket onto the dishes in the lower one. ⷠWater may appear on the sides and the door of the dishwasher as the stainless steel will eventually become cooler than the dishes. When the washing programme has finished, it is recommended that the dishwasher is unplugged and the water tap turned off. They depend on pressure and the temperature of the water, variations of the power supply and the quantity of dishes. Daily programme, made to meet the needs of a family who wants to load breakfast and dinner crockery and cutlery. Cleaning the filters The filters must be checked and cleaned from time to time. Put the flat filter back in the base of the washing compartment and ensure that it fits perfectly. Put the filter combination in place and lock by turning the handle clockwise to the stop. During this process ensure that the flat filter does not protrude above the base of the washing compartment. If residues of soil have clogged the holes in the spray arms, remove the debris with a cocktail stick. [. . . ] The water inlet hose must not be kinked, crushed, or entangled when it is being connected. If the appliance is connected to new pipes or pipes which have not been used for a long time, you should run the water for a few minutes before connecting the inlet hose. Do not use connection hoses which have previously been used on an old appliance. This appliance has been fitted with safety features which will prevent the water used in the appliance from returning back into the drinking water system. [. . . ]