User manual AEG BMS 18 C

[. . . ] Typically, the A-weighted noise levels of the tool are: Sound pressure level (K = 3 dB(A)) . Total vibration values (vector sum in the three axes) determined according to EN 60745. 1, 5 m/s2 WARNING The vibration emission level given in this information sheet has been measured in accordance with a standardised test given in EN 60745 and may be used to compare one tool with another. [. . . ] Cutting accessory contacting a , , live" wire may make exposed metal parts of the power tool , , live" and shock the operator. It is recommended to wear gloves, sturdy non slipping shoes and apron. Sawdust and splinters must not be removed while the machine is running. Plunge cuts without pre-drilling a hole are possible with soft materials (wood, light building materials for walls). Harder materials (metals) must first be drilled with a hole corresponding to the size of the saw blade. When working in walls ceiling, or floor, take care to avoid electric cables and gas or waterpipes. Do not dispose of used battery packs in the household refuse or by burning them. AEG Distributors offer to retrieve old batteries to protect our environment. Do not store the battery pack together with metal objects (short circuit risk). BATTERIES New battery packs reach full loading capacity after 4 - 5 chargings and dischargings. Battery packs which have not been used for some time should be recharged before use. BATTERY PACK PROTECTION LI-ION BATTERY The battery pack has overload protection that protects it from being overloaded and helps to ensure long life. under extreme stress the battery electronics switch off the machine automatically. If the machine does not start up again, the battery pack may have discharged completely. MAINTENANCE The ventilation slots of the machine must be kept clear at all times. Should components need to be replaced which have not been described, please contact one of our AEG service agents (see our list of guarantee/service addresses). [. . . ] Do not dispose of electric tools together with household waste material!In observance of European Directive 2002/96/EC on waste electrical and electronic equipment and its implementation in accordance with national law, electric tools that have reached the end of their life must be collected separately and returned to an environmentally compatible recycling facility. SPECIFIED CONDITIONS OF USE This sabre saw cuts wood, plastic, and metal. [. . . ]