User manual AEG SB2E 750 R

[. . . ] EC-DECLARATION OF CONFORMITY We declare under our sole responsibility that this product is in conformity with the following standards or standardized documents. SYMBOLS Please read the instructions carefully before starting the machine. [. . . ] Typically, the A-weighted noise levels of the tool are: Sound pressure level (K = 3 dB(A)) . Vibration information Total vibration values (vector sum in the three axes) determined according to EN 60745. Always disconnect the plug from the socket before carrying out any work on the machine. Do not dispose of electric tools together with household waste material!In observance of European Directive 2002/96/EC on waste electrical and electronic equipment and its implementation in accordance with national law, electric tools that have reached the end of their life must be collected separately and returned to an environmentally compatible recycling facility. WARNING The vibration emission level given in this information sheet has been measured in accordance with a standardised test given in EN 60745 and may be used to compare one tool with another. the declared vibration emission level represents the main applications of the tool. Appliances used at many different locations including open air must be connected via a current surge preventing switch. Hold power tool by insulated gripping surfaces, when performing an operation where the cutting accessory may contact hidden wiring or its own cord. Contact with a , , live" wire will also make exposed metal parts of the power tool , , live" and shock the operator. Appliances used at many different locations including open air must be connected via a current surge preventing switch. It is recommended to wear gloves, sturdy non slipping shoes and apron. Sawdust and splinters must not be removed while the machine is running. Always disconnect the plug from the socket before carrying out any work on the machine. [. . . ] Always disconnect the plug from the socket before carrying out any work on the machine. When working with large drill diameters, the auxiliary handle must be fastened in a right angle with the main handle (see illustrations, section Twisting the handle). [. . . ]