User manual AEG US 400 XE

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual AEG US 400 XE. We hope that this AEG US 400 XE user guide will be useful to you.


AEG US 400 XE : Download the complete user guide (4059 Ko)

You may also download the following manuals related to this product:

   AEG US 400 XE ANNEXE 0 (3160 ko)
   AEG US 400 XE ANNEXE 52 (3160 ko)
   AEG US 400 XE ANNEXE 30 (3160 ko)
   AEG US 400 XE ANNEXE 345 (3160 ko)
   AEG US 400 XE ANNEXE 840 (3160 ko)
   AEG US 400 XE ANNEXE 666 (3160 ko)
   AEG US 400 XE ANNEXE 232 (3160 ko)
   AEG US 400 XE ANNEXE 838 (3160 ko)
   AEG US 400 XE ANNEXE 643 (3160 ko)
   AEG US 400 XE ANNEXE 122 (3160 ko)
   AEG US 400 XE ANNEXE 598 (3160 ko)
   AEG US 400 XE ANNEXE 469 (3160 ko)
   AEG US 400 XE ANNEXE 922 (3160 ko)
   AEG US 400 XE ANNEXE 220 (3160 ko)
   AEG US 400 XE ANNEXE 159 (3160 ko)
   AEG US 400 XE ANNEXE 691 (3160 ko)
   AEG US 400 XE ANNEXE 712 (3160 ko)
   AEG US 400 XE ANNEXE 59 (3160 ko)

Manual abstract: user guide AEG US 400 XE

Detailed instructions for use are in the User's Guide.

[. . . ] Typically, the A-weighted noise levels of the tool are: Sound pressure level (K = 3 dB(A)) . Total vibration values (vector sum in the three axes) determined according to EN 60745. [. . . ] Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Hold power tool by insulated gripping surfaces, when performing an operation where the cutting accessory may contact hidden wiring or its own cord. Cutting accessory contacting a , , live" wire may make exposed metal parts of the power tool , , live" and could give the operator an electric shock. Appliances used at many different locations including open air should be connected via a residual current device of 30 mA or less. It is recommended to wear gloves, sturdy non slipping shoes and apron. Sawdust and splinters must not be removed while the machine is running. Always disconnect the plug from the socket before carrying out any work on the machine. Plunge cuts without pre­drilling a hole are possible with soft materials (wood, light building materials for walls). Harder materials (metals) must first be drilled with a hole corresponding to the size of the saw blade. When working in walls ceiling, or floor, take care to avoid electric cables and gas or waterpipes. SPECIFIED CONDITIONS OF USE This sabre saw cuts wood, plastic, and metal. EC-DECLARATION OF CONFORMITY We declare under our sole responsibility that this product is in conformity with the following standards or standardized documents. [. . . ] In observance of European Directive 2002/96/EC on waste electrical and electronic equipment and its implementation in accordance with national law, electric tools that have reached the end of their life must be collected separately and returned to an environmentally compatible recycling facility. Får endast anslutas till 1-fas växelström och till den spänning som anges på dataskylten. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE AEG US 400 XE




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual AEG US 400 XE will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.