User manual AEG WS 21-180 PLUS
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual AEG WS 21-180 PLUS. We hope that this AEG WS 21-180 PLUS user guide will be useful to you.
You may also download the following manuals related to this product:
AEG WS 21-180 PLUS (3289 ko)
AEG WS 21-180 PLUS MANUAL 2 (3289 ko)
AEG WS 21-180 PLUS MANUAL 2 (3289 ko)
AEG WS 21-180 PLUS MANUAL 2 (3289 ko)
AEG WS 21-180 PLUS MANUAL 2 (3289 ko)
AEG WS 21-180 PLUS MANUAL 2 (3289 ko)
AEG WS 21-180 PLUS MANUAL 2 (3289 ko)
AEG WS 21-180 PLUS MANUAL 2 (3289 ko)
AEG WS 21-180 PLUS MANUAL 2 (3289 ko)
AEG WS 21-180 PLUS MANUAL 2 (3289 ko)
AEG WS 21-180 PLUS MANUAL 2 (3289 ko)
AEG WS 21-180 PLUS MANUAL 2 (3289 ko)
AEG WS 21-180 PLUS MANUAL 2 (3289 ko)
AEG WS 21-180 PLUS MANUAL 2 (3289 ko)
Manual abstract: user guide AEG WS 21-180 PLUS
Detailed instructions for use are in the User's Guide.
[. . . ] This may significantly reduce the exposure level over the total working period. Identify additional safety measures to protect the operator from the effects of vibration such as: maintain the tool and the accessories, keep the hands warm, organisation of work patterns. Read all safety warnings and all instructions, including those given in the accompanying brochure. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. [. . . ] The motor's fan will draw the dust inside the housing and excessive accumulation of powdered metal may cause electrical hazards. Using water or other liquid coolants may result in electrocution or shock. Kickback and Related Warnings Kickback is a sudden reaction to a pinched or snagged rotating wheel, backing pad, brush or any other accessory. Pinching or snagging causes rapid stalling of the rotating accessory which in turn causes the uncontrolled power tool to be forced in the direction opposite of the accessory's rotation at the point of the binding. For example, if an abrasive wheel is snagged or pinched by the workpiece, the edge of the wheel that is entering into the pinch point can dig into the surface of the material causing the wheel to climb out or kick out. The wheel may either jump toward or away from the operator, depending on direction of the wheel's movement at the point of pinching. Kickback is the result of power tool misuse and/or incorrect operating procedures or conditions and can be avoided by taking proper precautions as given below. A) Maintain a firm grip on the power tool and position your body and arm to allow you to resist kickback forces. Always use auxiliary handle, if provided, for maximum control over kickback or torque reaction during start-up. The operator can control torque reactions or kickback forces, if proper precautions are taken. C) Do not position your body in the area where power tool will move if kickback occurs. kickback will propel the tool in direction opposite to the wheel's movement at the point of snagging. Safety Warnings Specific for Grinding and Abrasive Cutting-Off Operations: a) Use only wheel types that are recommended for your power tool and the specific guard designed for the selected wheel. Wheels for which the power tool was not designed cannot be adequately guarded and are unsafe. B) The guard must be securely attached to the power tool and positioned for maximum safety, so the least amount of wheel is exposed towards the operator. The guard helps to protect operator from broken wheel fragments and accidental contact with wheel. Abrasive cut-off wheels are intended for peripheral grinding, side forces applied to these wheels may cause them to shatter. D) Always use undamaged wheel flanges that are of correct size and shape for your selected wheel. Proper wheel flanges support the wheel thus reducing the possibility of wheel breakage. Flanges for cut-off wheels may be different from grinding wheel flanges. [. . . ] For cutting or separating use a closed protection cap, available as an accessory. SPECIFIED CONDITIONS OF USE This angle grinder can be used for separating, grinding, sanding and wire brushing many different materials, e. When resuming work, switch the machine off and then switch it back on again. STARTING CURRENT LIMITED (WS21-180+, WS21-230+, WS 21-230GVX, WS21-230EGVX) The starting current for the machine is several times greater than rated current. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE AEG WS 21-180 PLUS
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual AEG WS 21-180 PLUS will begin.