User manual ALCATEL-LUCENT SPEEDTOUCH 5X6
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual ALCATEL-LUCENT SPEEDTOUCH 5X6. We hope that this ALCATEL-LUCENT SPEEDTOUCH 5X6 user guide will be useful to you.
Manual abstract: user guide ALCATEL-LUCENT SPEEDTOUCH 5X6
Detailed instructions for use are in the User's Guide.
[. . . ] SpeedTouchTM 516/536/546/576
(Wireless) Residential ADSL Gateway
User's Guide
Release R5. 3. 0
SpeedTouchTM576 only
SpeedTouchTM536 only
SpeedTouchTM 516/536/546 576
User's Guide R5. 3. 0
Copyright
Copyright ©1999-2005 THOMSON. Passing on, and copying of this document, use and communication of its contents is not permitted without written authorization from THOMSON. The content of this document is furnished for informational use only, may be subject to change without notice, and should not be construed as a commitment by THOMSON. THOMSON assumes no responsibility or liability for any errors or inaccuracies that may appear in this document. [. . . ] This information should be provided by your service provider:
10 At the end of the configuration the following window appears:
Click Finish to complete the configuration. The Connect YourISP window (see below) appears.
46
E-DOC-CTC-20050120-0003 v1. 0
Chapter 3
Internet Connectivity Dial-In Clients
Starting a broadband Internet session
Proceed as follows:
1
On the Start menu, point Connect To and click the name of the connection you've created, for example YourISP. If you are using the Classic Start menu click Start > Settings > Network (and Dial-up) connections > YourISP.
2
The Connect YourISP window appears:
3 4 5
If requested, enter user name and password for your user account at the Service Provider. As soon as the connection is established, the Connection message box and Dialup window are minimised into an icon in the notification area:
6
You can open your web browser and surf the Internet.
E-DOC-CTC-20050120-0003 v1. 0
47
Chapter 3
Internet Connectivity Dial-In Clients
Terminating a broadband Internet session
Proceed as follows:
1
On the Start menu, point Connect To and click the name of the connection you've created, for example YourISP. If you are using the Classic Start menu go to Start > Settings > Network (and Dial-up) connections > YourISP.
2
The YourISP Status window appears:
3 4
Click Disconnect. As a result no Internet connectivity exists anymore.
48
E-DOC-CTC-20050120-0003 v1. 0
Chapter 3
Internet Connectivity Dial-In Clients
3. 4 Mac OS X PPPoE Dial-in Client
Prerequisites
To be able to use the MS Windows XP BroadBand Connection, your SpeedTouchTM must be configured for: ETHoA PPPoE Relay
Configuring a broadband connection
Proceed as follows:
1 2 3
On the Apple menu, click System Preferences. Make sure Built-in Ethernet is selected in the Show list and click the PPPoE tab:
4
Enter the Account Name and Password provided by your Service Provider. Select Save password in case you want the computer to remember the password for this account name. Optionally you can enter a name for this connection in the Service Provider field. All other fields may stay empty.
5
Click Apply Now.
E-DOC-CTC-20050120-0003 v1. 0
49
Chapter 3
Internet Connectivity Dial-In Clients
Starting a broadband Internet session
Proceed as follows:
1
Click the Internet Connect dockling. If the Internet Connect dockling is not available, go to the Applications folder on the system startup disk and double-click Internet Connect.
2
The following window appears:
Make sure Built-in Ethernet is selected in the Configuration list.
3 4 5
If needed, enter user name and password for your user account at the Service Provider. As soon as the connection is established you can open your web browser and surf the Internet.
Terminating a broadband Internet session
Proceed as follows:
1
Click the Internet Connect dockling. If the Internet Connect dockling is not available, go to the Applications folder on the system startup disk and double-click Internet Connect.
2
The following window appears:
Make sure Built-in Ethernet is selected in the Configuration list
3 4
Click Disconnect. As a result no Internet connectivity exists anymore.
50
E-DOC-CTC-20050120-0003 v1. 0
Chapter 4
SpeedTouchTM Web Interface
4 SpeedTouchTM Web Interface
Introduction
The SpeedTouchTM comes with embedded HTML pages, providing an interface to the software installed on the device. It allows easy setup and management of the SpeedTouchTM via your web browser form any PC connected to the SpeedTouchTM. See "1. 3. 1 Access via the Web Interface" on page 17 to access the pages.
SpeedTouchTM documentation
Consult: The SpeedTouchTM Installation and Setup Guide for more information on setup and installation procedures.
E-DOC-CTC-20050120-0003 v1. 0
51
Chapter 4
SpeedTouchTM Web Interface
4. 1 Navigation
Navigation components
The SpeedTouchTM web interface consists of following components: Menu Language Bar Navigation Bar Notification area Tasks
52
E-DOC-CTC-20050120-0003 v1. 0
Chapter 4
SpeedTouchTM Web Interface
4. 1. 1 Menu
Menu items
The menu is located on the left side of the page and consists of the following menu items: SpeedTouchTM: Provides basic information on the SpeedTouchTM. Broadband Connection: Allows you to view/configure your broadband connections. Toolbox: Allows you to assign games or applications to a device and secure your Internet connection. Home Network: Allows you manage your local network.
Collapsing and expanding the menu
Your are able to collapse/expand the menu by clicking the arrow located on the top of the menu.
4. 1. 2 Language Bar
Language bar
The language bar is located under the SpeedTouchTM logo and allows you to change the language of the SpeedTouchTM web interface.
!
The language bar will only be shown if more than one language is available.
4. 1. 3 Navigation Bar
Navigation bar
The navigation bar is located on the top of the page and allows you to: View the current user name. Get context related Help information.
Display level
Depending on the page you are viewing following buttons will be available: Overview to view a summary of the current status or configuration. Details to view more detailed information on the current status or configuration. Configure to change the current settings.
E-DOC-CTC-20050120-0003 v1. 0
53
Chapter 4
SpeedTouchTM Web Interface
4. 1. 4 Notification area
Notification area
The notification area is located under the Navigation Bar and is used to display: Error messages indicated by a red traffic light. [. . . ] Verify that your computer has a valid IP address, that is any address but 0. 0. 0. 0.
No dedicated firewall device or router is placed between your PC and the SpeedTouchTM. To repeat the search for your SpeedTouchTM, click Back or restart the wizard. As soon as the wizard finds your SpeedTouchTM, you can continue with the Upgrade Wizard.
E-DOC-CTC-20050120-0003 v1. 0
109
Chapter 6
Troubleshooting
6. 2 UPnPTM on Windows XP Systems
SpeedTouchTM not detected by UPnPTM or IGD Control Client
Check on following: Make sure the UPnPTM and Internet Gateway Device Control Client Networking components are added to your MS Windows XP system. Your computer doesn't support UPnPTM if you run an operating system other than MS Windows XP and MS Windows Millennium. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE ALCATEL-LUCENT SPEEDTOUCH 5X6
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual ALCATEL-LUCENT SPEEDTOUCH 5X6 will begin.