User manual ALPINE KCI-500B

[. . . ] When drilling holes in the chassis for installation, take precautions so as not to contact, damage or obstruct pipes, fuel lines, tanks or electrical wiring. dO NOT USE BOLTS OR NUTS IN THE BRAKE OR STEERING SYSTEMS TO MAKE GROUND CONNECTIONS. Bolts or nuts used for the brake or steering systems (or any other safety-related system), or tanks should NEVER be used for installations or ground connections. [. . . ] Moisture or dust that penetrates into this unit may result in product failure. The wiring and installation of this unit requires special technical skill and experience. To ensure safety, always contact the dealer where you purchased this product to have the work done. aRRANGE THE WIRING SO IT IS NOT CRIMPED OR PINCHED BY A SHARP METAL EDGE. Route the cables and wiring away from moving parts (like the seat rails) or sharp or pointed edges. If wiring passes through a hole in metal, use a rubber grommet to prevent the wire's insulation from being cut by the metal edge of the hole. Using the unit as a template, hold it at its mounting location and mark the holes to be drilled. Before drilling, make sure that there are no objects that could be damaged behind the mounting surface. 6 Ground Lead (Black) Connect this lead to a good chassis ground on the vehicle. Make sure the connection is made to bare metal and is securely fastened using the sheet metal screw provided. 7 Audio Interrupt In Lead (Pink/Black) Connect this lead to a cellular phone interface which provides a grounded output when a call is received. 8 IONBUS Cable 9 Ferrite Core Attach the Ferrite Core (included) to the both ends of the IONBUS cable at a location where the product does not touch the core when installing. IONBUS terminal IONBUS cable S video output terminal S video input terminal S video cable (Included with head unit) DVD Audio Link terminal DVD Audio Link cable (Included with Multimedia Manager) IONBUS cable (Included with Monitor) IONBUS cable (Included with KCI-500B CONVERTER) Ai-NET connector Ai-NET cable Ai-NET Output connector Ai-NET Input connector Ai-NET cable (Included with CD Changer) A When combined with a KCI-500B, you can connect an Ai-NET compatible changer XM Radio Module, DAB Tuner Unit to IONBUS compatible products. A A second KCI-500B cannot be connected to a KCI-500B IONBUS connector. [. . . ] Ignorera inte det som sägs här, eftersom det kan leda till allvarliga olyckor, till och med med dödlig utgång. Användandet av andra delar än som är avsedda för denna apparat kan leda till att apparaten skadas invändigt eller till ostadig montering på grund av lossnande delar. Se till att kabeln ansluts till blank metall och fästs ordentligt med hjälp av den medföljande plåtskruven. [. . . ]