User manual AMX TXC-24IR 24-BUTTON CREDIT CARD IR REMOTE

[. . . ] [. . . ] AMX IR sensors and receivers (including the IRX-SM+, IRX-DM+ and CP4/A) receive the 38KHz signal and translate it into pushes on channel codes 224 through 247 as shown in the channel map. AMX programming will translate these channel pushes into operations that control your source equipment. An example program is provided below: PUSH[IR_RCVR, 238] { PUSH[IR_RCVR, 225] PUSH[IR_RCVR, 226] } IF(SOURCE = VCR) { PUSH[IR_RCVR, 240] PUSH[IR_RCVR, 242] PUSH[IR_RCVR, 244] PUSH[IR_RCVR, 245] PUSH[IR_RCVR, 246] } IF(SOURCE = DVD) { PUSH[IR_RCVR, 240] PUSH[IR_RCVR, 242] PUSH[IR_RCVR, 244] PUSH[IR_RCVR, 245] PUSH[IR_RCVR, 246] } SOURCE = VCR SOURCE = DVD PULSE[VCR_IR, STOP] PULSE [VCR_IR, PAUSE] PULSE [VCR_IR, REW] PULSE [VCR_IR, PLAY] PULSE [VCR_IR, FFWD] PULSE [DVD_IR, STOP] PULSE [DVD_IR, PAUSE] PULSE [DVD_IR, REW] PULSE [DVD_IR, PLAY] PULSE [DVD_IR, FFWD] AMX Channel Map Note: The default channel map cannot be modified. Note: The TXC-24IR uses a single CR2025 coin battery. The battery compartment is located on the rear panel. Warranty exception: AMX Corporation warrants this product to be free of defects in material and workmanship under normal use for 30 days from the date of purchase from AMX Corporation. [. . . ] [. . . ]