User manual AOC F19

[. . . ] Product Registration Please link www. aoc. com, select your country or region, log in Product Registration to register. FCC Notice FCC Class B Radio Frequency Interference Statement WARNING: (FOR FCC CERTIFIED MODELS) NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. [. . . ] It may cause damage or break the LCD screen. Attaching the Cables Cable Connections On Back of Monitor and Computer 1. Connect one end of the 15-pin D-Sub cable to the back of the monitor and connect the other end to the computer's D-Sub port. (Optional ­ Requires a video card with DVI port) - Connect one end of the 24-pin DVI cable to the back of the monitor and connect the other end to the computer's DVI port. Turn on your monitor and computer. If your monitor displays an image, installation is complete. If it does not display an image, see Troubleshooting. Attaching Wall Mounting Arm Preparing to Install An Optional Wall Mounting Arm This monitor can be attached to a wall mounting arm you purchase separately. Follow the manufacturer's instructions to assemble the wall mounting arm. Line up the holes of the arm with the holes in the back of the monitor. Refer to the user's manual that came with the optional wall mounting arm for instructions on attaching it to the wall. Noted : VESA mounting screw holes are not available for all models, please check with the dealer or official department of AOC. Setting the Optimal Resolution The recommended resolution for this monitor is 1366 by 768. Set the resolution SLIDE-BAR to 1366 by 768. External Controls Press the power button to turn the monitor on or off. The other control knobs are located at front panel of the monitor (See Figure ). By changing these settings, the picture can be adjusted to your personal preferences. The power indicator will light up. 1 2 3 4 5 Eco mode(DCR) / Up Source(Auto) / Exit Contrast / Left 4:3 or wide / Right Menu / Power OSD Settings Press the Menu (Power) button to activate the OSD window. Once the desired function is highlighted, press the Menu (Power) button to activate sub-menu . Once the desired function is highlighted, press , button to button to change the setting. To exit OSD windows, select "exit" icon on main OSD, then press the Menu (Power) button . OSD Lock Function: To lock the OSD, press and hold the Left button while the monitor is off and then press power button to turn the monitor on. To un-lock the OSD - press and hold the Left button while the monitor is off and then press power button to turn the monitor on. Eco Mode and DCR hot key : Press the Eco key continuously to select the Eco mode of brightness and DCR on when there is no OSD ( Eco mode hot key may not be available in all models). Contrast adjustment hot key : When there is no OSD , press Contrast ( ) to active Contrast adjustment bar, press or to adjust Contrast. 4:3 or wide image ratio hot key: When there is no OSD, press continuously to change 4:3 or wide image ratio. (If the product screen size is 4:3 or input signal resolution is wide format, the hot key is disalbe to adjust. ) Source hot key : When the OSD is closed, press Auto/Source button will be Source hot key function (Only for the models with dual or more inputs) . Press Source button continuously to select the input source showed in the message bar , press Menu/Enter button to change to the source selected. Auto configure hot key: When the OSD is closed, press Auto/Source button continuously about 2 second to do auto configure. [. . . ] Welcome to link our website and send email to us if you have any problem. Compatibility : i-Menu supports major graphic cards of ATI, Nvidia, Intel, VIA(S3). Please contact with us if your graphic card was not supported iMenu software. Specifications Model number Driving system Viewable Image Size Pixel pitch Video Separate Sync. Display Color Dot Clock Horizontal scan range Horizontal scan Size(Maximum) Vertical scan range Vertical scan Size(Maximum) Optimal preset resolution Highest preset resolution Plug & Play Input Connector Input Video Signal Power Source Power Consumption Connector Type Signal Cable Type Dimensions & Weight: Height (with base) Width Depth Weight (monitor only) Weight (with packaging) Temperature: Operating Non-Operating Humidity: Operating Non-Operating Altitude: Operating Non-Operating F19 TFT Color LCD 470mm diagonal 0. 3mm(H) x 0. 3mm(V) R, G, B Analog lnterface & Digital Interface H/V TTL 16. 7M Colors 85. 5 MHz 30 kHz - 80 kHz 409. 8mm 55 Hz - 75 Hz 230. 4mm 1366 x 768 (60 Hz) 1366 x 768 (60 Hz) VESA DDC2B/CI D-Sub 15pin & DVI-D Analog: 0. 7Vp-p(standard), 75 OHM, Positive & DVI-D Digital Interface (TMDS) 100~240VAC, 50/60Hz Active < 37 W Standby < 1 W 15-pin Mini D-Sub & DVI-D Detachable 334. 3 mm 445. 8 mm 79. 9 mm 3. 7 kg 6. 7 kg 0° to 40° -20°to 60° 10% to 85% (non-condensing) 5% to 80% (non-condensing) 0~ 3000m (0~ 10000 ft ) 0~ 5000m (0~ 15000 ft ) LCD Panel Resolution Physical Characteristics Environmental EPA ENERGY STAR ® ENERGY STAR® is a U. S. [. . . ]