User manual AOC L42H831

[. . . ] 42 L42H831 TABLE OF CONTENTS TABLE OF CONTENTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 FOR YOUR SAFETY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 PRCAUTIONS AND REMINDERS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Package Contents. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Attaching the Base . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Preparing Your LCD TV for Wall Mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 PREPARATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] HDCP encrypts the transmission between the video source and the digital display for added security and protection. b) Refer to your TV Set-Top Box user manual for more information about the video output requirements of the product or consult For TV Set-Top Boxes with DVI your cable or satellite operator 17 1. Using a HDMI-DVI cable, connect the DVI end to your TV Set-Top Box and the HDMI end to the HDMI Input at the rear of the TV. Select HDMI using the INPUT button on the remote, side of the TV, or directly by pressing the HDMI button on the Remote Control. Note: a) The HDMI input on the TV supports High-bandwidth Digital Content Protection (HDCP). HDCP encrypts the transmission between the video source and the digital display for added security and protection. Refer to your TV Set-Top Box user manual for more information about the video output requirements of the product or consult your cable or satellite operator. Connection to an alternate audio player is required for audio. b) c) Using Component Video Connecting your TV Set-Top Box (Better): 1. Connect the Pr (red color) connector on your TV Set-Top Box to the corresponding Pr (red color) connector in the Component group. Connect the Pb (blue color) connector on your TV Set-Top Box to the corresponding Pb (blue color) connector in the Component group. Connect the Y (green color) connector on your TV Set-Top Box to the corresponding Y (green color) connector in the Component group. Using an audio cable (red and white connectors), connect the cable to the audio output connectors associated with the Component output on 18 your TV Set-Top Box and connect the other end to the audio connectors associated with the Component. Select Component (Video 3) using the INPUT button on the remote, side of the TV or directly by pressing the Component button on the Remote Control. Note: Refer to your TV Set-Top Box user manual for more information about the video output requirements of the product or consult your cable or satellite operator. Using an AV Cable, connect the Video (yellow color) connector on your Set-Top Box to the corresponding Video (yellow color) connector in the AV group at the rear of the TV. Using the red and white connectors, connect the cable to the audio output connectors associated with the Video output on your Set-Top Box and connect the other end to the audio connectors associated with the AV input at the rear of the TV. Select Composite (Video 1) using the INPUT button on the remote, side of the TV or directly by pressing the AV button on the Remote Control. 3. 4. Using a Coax (RF) cable, connect one end to the TV OUT (RF) on your Set Top Box and the other end to the DTV/TV input at the rear of the TV. Select TV using the INPUT button on the remote, side of the TV or directly by pressing the TV button (below the WIDE button) on the Remote Control. Note: Refer to your Set Top Box user manual for more information about selecting the video or RF output of the product. Connecting Your DVD Player Using HDMI DVD players that have a digital interface such as HDMI (High Definition Multimedia Interface) should be connected to the HDMI input of the LCD TV for optimal results. 20 Connecting your DVD Player (Best) 1. Connect a HDMI cable to the HDMI output of your DVD player and the other end to the HDMI Input at the rear of the TV. Select HDMI using the INPUT button on the remote, side of the TV or directly by pressing the HDMI button on the Remote Control. For DVD Players with DVI: 1. Using a HDMI-DVI cable, connect the DVI end to your DVD player and the HDMI end to the HDMI Input at the rear of the TV. Select HDMI using the INPUT button on the remote or side of the TV, or directly by pressing the HDMI button on the Remote. Note: 1. 2. Refer to your DVD player user manual for more information about the video output requirements of the product. [. . . ] Avis Canadian ­ Cat apparel numerous de la classed B respected toutes les exigencies du règlement sur le materiel brouilleur du Canada. 30 PRODUCT SPECIFICATION NOTE: *This model complies with the specifications listed below. *This model may not be compatible with features and/or specifications that may be added in the future. *42" LCD TV Viewable image size: diagonal 1067mm Television System: NTSC standard PAL M/N HDMI Terminals: HDMI INPUT: Rear HDMI x2 HDCP compliant E-EDID compliant Supported scan rates: 1080i, 1080p, 720p, 480p, 480i Channel Coverage: VHF: 2 through 13 UHF: 14 through 69 Cable TV: Mild band (A-8 through A-1, A through I) Super band (J through W) Hyper band (AA through ZZ, AAA, BBB) Ultra band (65 through 94, 100 through 125) VGA Terminals: VGA INPUT: Rear VGA (D-SUB 15 Pin) Input x1 E-EDID compliant Supported scan rates: 640X480 /60Hz/72Hz/75Hz 720X400 /70Hz 800x600 /60Hz /72Hz /75Hz 1024X768 /60Hz 1360X768 /60Hz 1440X900/60HZ Recommended: 1360X768/60Hz Audio INPUT: Headphone Mini-jack for stereo (3. 5) Power Source: AC power supply: 100V~240 V, 50/60 Hz Power Consumption 250 W 1 W in standby mode (power cord plugged in and power OFF) Dimensions: Include Stand: 1009. 5mm(W) x 688. 1mm(H) x262. 2mm(L) Audio Power 7W + 7W, Internal Speaker Weight:21kg(With Stand) Wall Mounting: 400x200mm (Wall mount kit is not included) Video/Audio Terminals: Rear AV x1 , Side AV x1 S-Video/Video/Audio Input Rear AV out x1 Video/Audio output S-VIDEO INPUT: Y : 1 V(p-p), 75 ohm, negative sync. C : 0. 286 V(p-p) (burst signal), 75 ohm Supplied Accessories: Remote Control Two (AAA) Batteries (Except Argentina) Base Four M4 screws (to attach the Base to the stand) Power Cord Signal cable Aduio cable User Manual Quick Setup Guide VIDEO/AUDIO INPUT: VIDEO: 1 V(p-p), 75 ohm, negative sync. [. . . ]