User manual APEX AVL2778

[. . . ] Caution Notice WARNING: RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). The lighting flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) insturctions in the literature accompanying the appliance. WARNING: TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. NOTE TO CABLE/TV INSTALLER: REGULATORY INFORMATION This reminder is provided to call the CATV system installer's attention to Article 820-40 of the National Electric Code (U. S. A. ). The code provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of the cable entry as practical. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. [. . . ] Press the INPUT button on the remote control to select VGA. 16:9 33. 75 kHz, 60 Hz 1280x720 720p Video Signal Resolution 16:9 4:3 16:9 4:3 31 kHz, 60 Hz 31 kHz, 60 Hz 15 kHz, 50/60 Hz 15 kHz, 60/50 Hz (Optional 3. 5mm stereo audio cable required) MODE 14 1080i 480p 480i 1920x1080 Resolution 720x480 704x480 720x480 704x480 33. 75 kHz, 60 Hz H/V Frequency 16:9 2200x1125 858x525 858x525 858x525 858x525 1650x750 Remarks Connecting Video Equipment to VGA Input (Digital SET-TOP-BOX, Personal Computer. . . etc. ) 7 1 Menu adjustments are available to change the settings of your LCD TV to your preferences. Over the next few pages you will be shown how to adjust all available input sources & settings. Once you've selected your desired sub-menu, press the desired setting, then press / buttons to adjust. Display Advanced TV Setup TV Mode Menu Adjustments To select TV mode, press the INPUT button located on the remote or top of the LCD TV panel until chanbutton to select each sub-menu. Use / / buttons and Audio / buttons to select a System Highlight Brightness to make picture brighter or darker. Highlight Contrast to increase or decrease the picture contrast. Highlight Backlight to increase or decrease the intensity of light within the panel. Highlight Picture to select between factory presets: Movie, Sport, Game, Vivid or User* modes. *When in USER mode you have access to highlight the following sub-menus: Highlight Noise Reduction to adjust noise reduction level from HIGH, MIDDLE, to LOW. Highlight Film Mode to turn on or off the deinterlacing 3:2 movie feature for DVD viewing. Highlight Nature Color to intensify colors typically found in nature scenes. Highlight CH Scan to automatically store all available channels into memory. Highlight CATV / AIR to designate whether a cable or over the air signal will be fed into the LCD TV tuner. Highlight Channel ADD / DEL to add or delete a specific channel of your choice. Highlight Balance to adjust the balance between right and left speakers. Highlight Recall to restore to factory default settings. Highlight Language to select the following languages: English/French/Spanish/Germ an/Italian/Japanese/Chinese (Traditional)/Chinese. Highlight OSD Background to select an opaque or translucent background. Each sequential press of the / buttons will display CCICC4, T1-T4, OFF. 20) Highlight Recall to restore to factory default settings. Highlight Hue to change colors towards a red or green tint. Highlight Sharpness to make the picture sharper or softer. Highlight Saturation to change the intensity of color. Highlight Color Temp button to select "Cool" "Normal" or "Warm". Highlight Recall to restore to factory default settings. Highlight Recall to restore to factory default settings. 15 Menu Adjustments AV Mode / S-Video 2 Menu adjustments are available to change the settings of your LCD TV to your preferences. To select AV or S-Video mode, press the INPUT button located on the remote or top of the LCD TV panel button to select each sub-menu. Use / Once you've selected your desired sub-menu, press the setting, then press / buttons to adjust. Advanced / buttons and Audio / buttons to select a desired System Display Highlight Brightness to make picture brighter or darker. Highlight Contrast to increase or decrease the picture contrast. Highlight Backlight to increase or decrease the intensity of light within the panel. Highlight Hue to change colors towards a red or green tint. Highlight Picture to select between factory presets: Movie, Sport, Game, Vivid or User* modes. *When in USER mode you have access to highlight the following sub-menus: Highlight Noise Reduction to adjust noise reduction level from HIGH, MIDDLE, to LOW. Highlight Film Mode to turn on or off the deinterlacing 3:2 movie feature for DVD viewing. Highlight Nature Color to intensify colors typically found in nature scenes. Highlight Balance to adjust the balance between right and left speakers. Highlight Recall to restore to factory default settings. Highlight Language to select the following languages: English/French/Spanish/German/ Italian/Japanese/Chinese (Traditional)/Chinese. Highlight OSD Background to select an opaque or translucent background. Each sequential press of the / buttons will display CCI-CC4, T1T4, OFF. [. . . ] The consumer will be responsible for all tariffs, duty and taxes imposed to ship or receive warranty or warranty replacement units to and from the U. S. You must receive a return authorization number before sending a unit in for service. There are no exceptions and no package will be accepted without a valid return authorization number clearly visible on the package. Limited Ninety (90) Day Labor Warranty Apex Digital warrants It will be responsible for labor charges on this product for a period of ninety days from the date of original retail purchase. [. . . ]