User manual ART TPS II

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual ART TPS II. We hope that this ART TPS II user guide will be useful to you.


ART TPS II : Download the complete user guide (291 Ko)

You may also download the following manuals related to this product:

   ART TPS II DATASHEET (169 ko)

Manual abstract: user guide ART TPS II

Detailed instructions for use are in the User's Guide.

[. . . ] IMPORTANT SAFETY INSTRUCTION ­ READ FIRST This symbol, whenever it appears, alerts you to the presence of uninsulated dangerous voltage inside the enclosure-voltage that may be sufficient to constitute a risk of shock. This symbol, wherever it appears, alerts you to important operating and maintenance instructions in the accompanying literature. Read manual. Read instructions: Retain these safety and operating instructions for future reference. Power sources: Connect the unit to mains power only of the type described in this user guide or marked on the rear panel. [. . . ] PHASE REVERSE SWITCH The Phase Reverse switch is provided to reverse the phase of the signal. This switch works on Pins 2 and 3 of the XLR output jack and -7- also reverses the polarity of the ¼" output jack. In the Reverse (or "in") position, Pins 2 and 3 are reversed and the signal is changed to 180 degrees out of phase. The signal level should average ­6 to 0 dB on the meter, occasionally hitting the clip light on the highest peaks. When the meter is in this range, you are getting the lowest noise and distortion out of the preamp stage. The +20dB switch does not affect the meter, as the switch is part of the tube gain stage. VU METER The VU Meter gives an analog representation of the TPS II tube output signal level. Besides showing the average analog level, it is sensitive to attack transients. When not using OPL, the VU Meter is a great indicator of how hard you are running the tube. It also helps in setting a consistent level as you change mics and instrument sources. The VU Meter also reflects the impact of the OPL circuitry on the signal. For example, if the signal is "in the red" on the meter, the meter will reflect the attenuation of the signal when the OPL is activated, and the signal is brought out of the "red". -9- OUTPUT CONTROL The Output Control sets the output level of the TPS II. Turning the control clockwise increases the level of the output signal. When setting the Output level control, refer to the VU Meter for an accurate level leaving the preamp. When setting the Output level control, refer to the VU Meter for an accurate level leaving the preamp. The marking on the output control determines the meter calibration to output level. If the Output control is set to ­10, then the output of the unit is ­10dBu when the meter reads 0 VU. For +4 (pro) systems, set the Output control to +4 and the meter will be calibrated to your system levels. - 10 - CONNECTIONS It is easy to interface the unit with a wide variety of equipment. The front panel houses 2 dual-purpose ¼" / XLR input jacks, and the rear houses balanced XLR and ¼" inputs as well as balanced XLR and unbalanced ¼" outputs. Standard ¼" and XLR inputs and outputs make patching simple. DUAL PURPOSE INPUT JACKS (FRONT) The front mounted, dual-purpose jacks act as both balanced XLR jacks, and unbalanced ¼" jacks. The XLR Input jacks are primarily intended for microphone input, and as such, can furnish Phantom Power when needed. [. . . ] If you need to, give it a twist. . . you'll find the setting for the tone you are searching for!Plug the instrument into either input and use the XLR or ¼" (or both) outputs to connect to your recorder, board or PA system. Because of it's low noise and excellent tonal qualities, the TPS II is ideal for running mixes through before recording to DAT, cassette, or even into your computer or DAW. Used as a mastering device, the preamps are capable of adding warmth and gentle tube compression to the signal. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE ART TPS II




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual ART TPS II will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.