Detailed instructions for use are in the User's Guide.
[. . . ] product sheet product: platform: division: tactical openAccess Node r Ascom openAccess® security communication
segement : defense
ASCOM TACTICAL openACCESS NODE R MOBILE VOICE AND DATA SWITCH FOR RADIO INTEGRATION
Ascom openAccess Nodes are integrated voice and data switches that provide the essential foundation for today's mission critical communications infrastructures. they are used by national and international military forces, peace keeping troops and crisis management teams. [. . . ] Ascom tactical openAccess Node r is highly reliable and adaptable to a wide variety of extreme ad-hoc deployments. the watertight ultra rugged enclosure is hermetically sealed to withstand severe humidity and dust exposure as well as extreme temperatures. Its form-factor is optimally designed for space/weight-constrained military vehicles and ground mobile deployments. It is corrosion resistant; shock/vibration protected and can be easily mounted in existing pr4G amplifier racks.
product sheet: tActIcAL opeNAccess Node r
Technical Specification
Networking
Network topology Topology changes Routing Routing path selection Data Features IP DNS DHCP Radio Features Tactical radio network topology Radio Connection ARQ Management Features Management Remote configuration and monitoring based on SNMP and Network Management Application (NMA). ConfiguraConfiguration storage Update management tion changes are possible without reset or reboot. PR4G transparent data interface and remote control interface supported) Per-link ARQ across radio networks Mechanical Size (LxHxD)/mm Weight Connectors 279x105x215 (without connectors) 6kg Circular interface and power supply plugs, mounted on front side IPv4 Built-in Domain Name Server for IP-address-to-name and name-to-IP-address translation. Built-in Dynamic Host Configuration Protocol server for IP address assignment. Emissions EMC MIL-STD-461E (CE102, 10kHz 10MHz, figure CE102-1 on 24 VDC; RE102, 10 kHz 1GHz, figure RE102-4 / army) MIL-STD-461E (CS114: figure CS114-1 on all cables, 10kHz-1MHz curve #3, 1MHz-30MHz curve #4, 30MHz200MHz curve #4; RS103: 30MHz 1GHz 20V/m, 30MHz18GHz 50 V/m). ESD air discharge with 8kV, contact discharge with 4kV according to IEC 61000-4-2. Burst 1 kV according to IEC 61000-4-4 coupling gripper on the cable. Burst 1 kV according to IEC 61000-4-4 direct coupling on 24V line. Surge on 24VDC: according to EN 61000-6-2 (Immunity, Industry, Table 3 dc power port); line-to-earth +/- 0. 5kV 1. 2 / 50 us (8/20), 12 Ohm; line-to-line: +/- 0. 5kV 1. 2 / 50 us (8/20), 2 Ohm. Shock MIL-STD-810F, method 516. 5, procedure I, 30g 11 ms sawtooth, mounted in swing frame
Power
Input voltage Power consumption Power autonomy Available Interfaces Remote relay Serial lines Switched Ethernet Service interface User Interfaces Display Status Operational displays Switches / keys 2-digit process display PC (HD and LAN activity) radio control, supply power, fans, temperature, storage battery On/Off Reset Test Relay I/O control over IP 6 x asynchronous port 16C550 compatible 4 x synchronous port 2 x 10Base-T / 100Base-TX 1xUSB 2. 0, 1xRS-232 24VDC (18-33VDC) 20W nominal, 30W maximal An internal lithium-polymer storage battery 24V / 1. 5Ah provides power for 5 minutes.
Environmental Conditions
Operation: -20. . +55°C, MIL-STD-810F, 502. 4, procedure Temperature II, MIL-STD-810F, 501. 4, procedure II Storage: -30. . +60°C, MIL-STD-810F, 502. 4, procedure I, MIL-STD-810F, 501. 4, procedure I Cooling possible without external air exchange Cooling If required, an internal fan activates the airflow and optimises the cooling. [. . . ] Ascom gives no warranty and makes no representation that any of its products contained in this document are designed for any particular use or purpose. the graphics and contents of this document are the copyrighted work of Ascom and contain proprietary trademarks and tradenames of Ascom. [. . . ]