User manual AT&T 100

[. . . ] USER'S MANUAL Part 2 Traditional Telephone 100 Wall and Table Please also read Part 1 -- Important Product Information. AT&T and the globe symbol are registered trademarks of AT&T Corp. licensed to Advanced American Telephones. © 2000 Advanced American Telephones. 850003047 Issue 1AT&T 5/00 PARTS CHECKLIST Remember to save your sales receipt in case you ever need warranty service, and make sure this telephone package includes the items shown below: TELEPHONE BASE Wall Model TELEPHONE BASE Table Model Receiver volume switch Ringer volume switch Coiled handset cord Telephone line cord TELEPHONE HANDSET Dial Mode This telephone has a selectable push-button dial and will work with either tone or rotary telephone service. [. . . ] Push the telephone firmly against the wall jack, and pull down until it is held securely by the mounting studs. Connect handset to telephone base Plug one end of the coiled handset cord into the handset. If you can't hear a dial tone, refer to "In Case of Difficulty" and try to correct the problem. TO DISCONNECT the line and handset cords, squeeze the clip on the modular plug and pull it out of the jack. Dial Mode Switch 3 OPERATION Receiver Volume Control The Receiver Volume Control can be adjusted for a comfortable listening level. The switch has variable volume positions. Redial The telephone always stores in memory the last phone number dialed. To dial the same number again, lift the handset and press REDIAL . Erasing Redial For privacy, you can erase the redial memory. Lift the handset, then press any digit (1-9). Mute Hold down MUTE to turn off the handset microphone. You can then talk privately to someone else in the room without the person on the phone hearing you. You will still be able to hear the other person, but anything you say will not be heard. When you release the button, your caller will again be able to hear your voice. Ringer Volume Control The RINGER switch allows you to turn the telephone ringer OFF, or set it to ring at LO or HI volume. Other telephones in your home will still ring; they are not affected by the switch. Temporary Tone Dialing Temporary tone dialing is used only when you have rotary service. This is useful if you need to send tone signals for access for telephone banking or long-distance services. With the Dial Mode switch set to DP (dial pulse), dial a telephone number. After you hang up, the phone automatically returns to rotary service. * 4 IN CASE OF DIFFICULTY If you have difficulty operating this phone, try the suggestions below. [. . . ] If there are several other phones on the same line, try disconnecting some of the other telephones. Having too many telephones can also create problems such as low ringer volume or impaired quality during calls. Other Problems For customer service, visit our website at www. telephones. att. com or call 1 800 222-3111. [. . . ]