User manual AT&T E560-2

[. . . ] User's Manual 5. 8 GHz Expansion Handset E560-2/E560-5 For use with AT&T model E5640/E5643B/ E5644B/E5655 Congratulations on your purchase of this AT&T product. Before using this telephone system, you must read Important safety information on pages 20-24 of this manual. NEED HELP? Our representatives are here to help you with any questions concerning the operation of this product, available accessories, or any other related issues. Call toll free 1 (800) 222-3111 In Canada, call 1 (866) 288-4268 or visit our website at www. telephones. att. com Model #: Product name: Serial #: (found at the bottom of the handset charger) Purchase date: Place of purchase: AT&T E560-2/E560-5 5. 8 GHz cordless telephone IMPORTANT Information about caller ID with call waiting This product has a caller ID with call waiting feature which works with service from your local telephone service provider. Caller ID with call waiting lets you see the name of the caller before answering the telephone, even when on another call. Contact your telephone service provider if: · you have both caller ID and call waiting, but as separate services (you may need combined service). [. . . ] If your telephone is plugged in with a modem or a surge protector, plug the telephone (or modem/ surge protector) into a different location. If this solves the problem, re-locate your telephone or modem farther apart from each other, or use a different surge protector. The layout of your home or office might be limiting the operating range. Trying moving the telephone base to another location, preferably a higher location for better reception. Disconnect the telephone base from the modular jack and plug in a corded telephone. If calls are still not clear, the problem is probably in the wiring or local service. Select channels four through 10 for your router (refer to the user's manual of your router for more information). If the other telephones in your home are having the same problem, the problem is in the wiring or local service. If yes, you need to have a DSL filter installed at every telephone jack that has a telephone connected to it. Contact your DSL service provider for filter information. · · · · · · · · 16 Troubleshooting Problem I hear noise in the cordless handset, and none of the keys or buttons work · Suggestion Make sure the telephone line cord is plugged in securely. The system does · not receive caller ID or the system does not display · caller ID during call waiting · Make sure you subscribe to caller ID with call waiting features services provided by the local telephone company. Both you and the caller's telephone companies must use equipment which are compatible with caller ID service. If you subscribe to DSL service, install a noise filter to the telephone line between the telephone base and the telephone line jack. Contact your DSL service provider for filter information. · · Make sure the answering system is on. The answering system does not · If Toll Saver is activated, the number of rings answer after the changes to two when there are new messages waiting. correct number of rings · If the memory is full or if the answering system is off, the system will answer after ten rings. · In some cases, the answering system may be affected by the ringing system used by the local telephone company. The announcement message is not clear · When recording the announcement, make sure you speak in a normal tone of voice about nine inches from the telephone base. Make sure there is no background noise (television, music, traffic, etc. ) when recording. · 17 Troubleshooting Problem The answering system does not record message · Suggestion Make sure the answering system is turned on. When the answering system is on, the red light on the ANSWER ON/OFF key is lit. If a caller leaves a very long message, part of it may be lost when the system disconnects the call after four minutes. If the caller pauses for more than seven consecutive seconds, the system stops recording and disconnects the call. If the memory on the system becomes full during a message, the system stops recording and disconnects the call. If the caller's voice is very soft, the system may stop recording and disconnect the call. [. . . ] If AAT chooses to replace this product, AAT may replace it with a new or refurbished product of the same or similar design. AAT will return repaired or replacement products to you in working condition. Repair or replacement of Product, at AAT's option, is your exclusive remedy. You should expect the repair or replacement to take approximately 30 days. 28 Limited warranty 3. [. . . ]