User manual AUDIOVOX JE2369

[. . . ] To comply with the FCC RF exposure compliance requirments , no change to the antenna or the device is permitted. Any change to the antenna or the device could result in the device exceeding the RF exposure requirements and void user's authority to operate the device. 06 07 07 07 08 08 This device complies with part 15 of the FCC RULES. Operations is subject to the following two conditions: (1) This device may not cause harmful interference and (2) This device must accept any interference received, including interference that may cause undisried operation. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL The lighting flash with Arrowhead Symbol within an equilateral triangle is intended to alert the user to the presence of "uninsulated " dangeros voltage" within the product's enclosure that may be of sufficient magnitude to consistute a risk of electric shock to persons. [. . . ] Either the power button on the remote or the "MODE" button on the front of the TV must be pressed to turn the TV on. Press the "MODE" button to select the desired viewing mode. 18 2 4 10 12 14 16 18 1 3 To prevent battery leakage which may result in bodily injury or damage to the remote : 1. Remove batteries when the remote is not used for a long time. 11 13 15 17 5 7 6 8 8 Note: 1. When press the TV button, the remote will get into TV function mode, each time when press the TV function button, the LED will flash "RED" light. When in DVD Mode, each time when press the DVD function button, the LED will flash "GREEN" light. 2. Some of the buttons are designed for operate single disc DVD player, pls read the DVD manual to operate the DVD player. 9 INPUT/OUTPUT : 10. RECALL : Channel Return DVD Mode: NEXT TRACK ( ): Select Next Title/Chapter FR( ) : FAST Reverse Play DVD : DVD Mode Selected FF( ) : FAST Forward Play MENU : DVD Root Menu PREVIOUS TRACK ( ): Select Previous Title/Chapter 18. Connect the cable that comes along with the unit to the one you are using when needed. TV AVTENNA ATTENTION : Please refer external setting operating instruction. (photo. 2) Noted: When connect Component Video input, please set OSD (AV1 Select) to "CV" to view Component-Video source. Input (RCA) from other Equipment: Connect to the TV AV IN 2 socket. CATV CABLE Connecting to Other Equipment : 1. You can connect your video recorder, amplifier, game console etc, to the unit, to enjoy high quality, digital audio-visual effect. Using the S-Video cable, connect your equipment to the S-Video/Component socket on the TV Side Input Panel. (photo. 2) Noted: When connect AV IN 2, please set OSD (AV1 Select) to "AV" to view AV IN 2 source. Output (RCA) to other AV Equipment: Output the AV Signal using the unit AV output socket. ATTENTION : Please refer external setting operating instruction. (photo. 1) Noted: When connect S-Video input, please set OSD (AV1 Select) to "SV" to view S-VIDEO source. 06 Noted: When connect AV OUT 1, please set OSD (AV1 Select) to "AV" to view AV OUT 1 source. 07 * VGA Input: This unit provides VGA (Computer) input connector. To connect audio source, using audio cable to connect from computer audio output to VGA audio input. 5. When POWER indication LED on unit turns RED in color indicating power is connected. Press the "Power" button on the remote control, the POWER indication LED on the TV Front Panel will turn "GREEN in color". ATTENTION : Please refer external setting operating instruction. (photo. 3) Noted: When connect VGA input, please set OSD (AV1 Select) to "PC" to view VGA source. Power Indication LED Connect Power: Connect to the power source using the power cable and adapter provided. * MODE: 1. Press the "Mode" button on the TV front panel or "SOURCE" button on remote control to select from the various mode settings. The mode setting status will change each time the "Mode" or "SOURCE" button is pressed ­ "AV1/AV2/CH 00" S-VIDEO S-VIDEO AV1/AV2 CHANNEL DC 13. 2V DC INPUT SOCKET ATTENTION: Ensure the power supply is connected to the unit. When not using unit for a long period of time, remove DC input socket from the main power point. ** Please make sure video source is been connected properly. 08 09 * Volume Setting: 1. / ) button on TV front control panel or remote control to * Mute: 1. Press "MUTE" button again or "Volume +/-" button to return sound back to speakers. * Channel Select: 1. Press "Channel / " button on remote control or TV Front Control Panel to change/select channels. [. . . ] Cleaning the LCD Monitor: PIP Setting PIP Mode MAIN Au d i o Size H Po s i t i o n V Po s i t i o n HF:48. 3KHz VF:59. 9Hz AV1 1024x768 SEP HF:48. 3KHz VF:59. 9Hz AV1 1024x768 SEP PIP Setting PIP Source PIP Mode TV ON PIP Setting PIP Source TV AV 2 AV1 HF:48. 3KHz VF:59. 9Hz 1024x768 SEP AV1 HF:48. 3KHz VF:59. 9Hz 1024x768 SEP PIP Setting PIP Source TV PIP Mode OFF PIP Setting PIP Mode ON PIP PIP PIP PIP PIP 1. Use a soft, clean & dry cloth to gently wipe off the dust on the LCD monitor. Cleaning the Enclosure: SEP AV1 HF:48. 3KHz VF:59. 9Hz 1024x768 SEP AV1 HF:48. 3KHz VF:59. 9Hz 1024x768 SEP AV1 HF:48. 3KHz VF:59. 9Hz 1024x768 1. Use a soft, clean & dry cloth to gently wipe off the dust on the LCD monitor. [. . . ]