User manual AXIS 27323R1

[. . . ] If the image resolution is larger than the display's, the center of the view is shown. The end points of a PTZ camera's view can be tested using the menu item found at Monitor > PTZ. By pressing the navigator button on the Pocket PC you can move the PTZ camera view one step. At the bottom of the screen is a focus indicator bar that changes color depending on the camera's focus. [. . . ] If the Master Credentials match one of the administrator accounts on a device, access is permitted. If a device has a different user name and password than the Master Credentials, you can enter the User name and Password in Devices > Enter Credentials. See also: Main window Device menu Devices menu Add Device - A dialog opens to enter IP Address, HTTP Port, User name and Password of a new device. There is also an option to use Master Credentials when contacting the device. Enter Credentials - By default, Use Master Credentials is enabled to access devices. If the user name and password in the device are different than the Master Credentials, enter the network camera's credentials here and uncheck Use Master Credentials. Properties - Lists the device's properties such as Name, IP Address, Port used, etc. See the network camera's user's manual for more information on what these properties entail. I/O - Opens a split window with Outputs listed at the top and Inputs listed at the bottom. This option is enabled only if the network camera has I/O capabilities. Default means the camera's internal settings are used. · Resolution - Select the resolution to use for the image. 4 AXIS Installation Monitor - User's Manual · Rotation - Rotates the camera view. · Frame Rate - Enter frames per second to view images from camera. · Compression - A higher value will give lower quality images and a lower value will give better images as there is less compression. · Channel - Video server channel. Open Monitor - Opens monitor to view camera image. The monitor window can also be opened by double-tapping on the listed device. This can also be accomplished by pressing the center Pocket PC's hard key. See also: Main window Main menu The Monitor menu Close - Closes the Monitor window. Image - Set the video scale of monitor. · Scale-To-Fit - Displays the whole network camera's view inside the window. The camera view may be resized to fit. · Actual Size - Displays the network camera's view at its actual size. Reset Focus Indicator - Resets the focus indicator bar at the bottom of monitor screen. PTZ - Used for testing the end points for the pan and tilt features of network cameras with PTZ capabilities. [. . . ] Note: To connect to a wireless network you will have to have your Pocket PC configured properly. Consult your Pocket PC's user's manual and System Administrator. See also: Single camera setup Tips and tricks · Make sure the network is configured properly. · Use Internet Explorer on your Pocket PC to verify that the cameras can be reached. [. . . ]