User manual BARRACUDA NG FIREWALL 4.2.13 RELEASE AND MIGRATION NOTES REV 1.2
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual BARRACUDA NG FIREWALL 4.2.13. We hope that this BARRACUDA NG FIREWALL 4.2.13 user guide will be useful to you.
Manual abstract: user guide BARRACUDA NG FIREWALL 4.2.13RELEASE AND MIGRATION NOTES REV 1.2
Detailed instructions for use are in the User's Guide.
[. . . ] If ath based WLAN devices were used within a bridging group, the system froze on activation of the WLAN devices. XDSL, DHCP, ISDN or UMTS links configured using Own Routing Table while Clone Routes was set to No prevented the configured routes or the configured default route of being introduced into the policy table. This issue has been fixed.
Note: If a box was updated from patch 11 and did not have hotfix 359 applied but had Clone Routes set to No, a manual reboot must be performed after updating to patch 13 in order to introduce correct route handling.
Severity / Probability
high / high
Request No.
1506880
VPN Service
4. 2. 13
high / low
1506896
Network
4. 2. 13
medium / medium
Barracuda OS
4. 2. 13
medium / low
Firewall
4. 2. 13
medium / low
Network
4. 2. 13
medium / low
1506290
Network
4. 2. 13
In rare cases it happened that a scripted restart of an XDSL link would not work. An issue concerning the formatting of USB sticks under Windows 7 during the install process has been fixed. [. . . ] Due to an error in the proxy statistics module, FTP statistics were logged in an erroneous format, generating the following error messages into Box >
Statistics > cstatd:
Severity / Probability
low / low
Request No.
Control Center
4. 2. 13
low / low
Control Center
4. 2. 13
low / low
DHCP Service
4. 2. 13
low / low
DHCP Service
4. 2. 13
low / low
FTP Gateway
4. 2. 13
low / low
1506576
HTTP-Proxy
4. 2. 13
low / low
1506038
HTTP Proxy
4. 2. 13
low / low
HTTP Proxy
4. 2. 13
low / low
1506568
HTTP Proxy
4. 2. 13
low / low
1506520
HTTP Proxy
4. 2. 13
low / low
1506704
HTTP Proxy
4. 2. 13
low / low
1506571
Unspecified error. file I/O error
Network
4. 2. 13
If the OSPF service was blocked, it was automatically started after a network restart although it shouldn't. Packets with an MTU size bigger than 1500 bytes could crash a box when sent over a bridged network. This issue has been fixed.
low / low
Network
4. 2. 13
low / low
1506273
Network
4. 2. 13
low / low
1505052
6 Bugfixes Included with Barracuda NG Firewall Patch 13
Table 12 Barracuda NG Firewall Module
Network
Patch
4. 2. 13
Description
If PPTP was configured as a DSL link, the MTU field was not editable until the configuration dialog was closed and then reopened. It was not possible to re-establish VPN connections via L2TP that existed before and broke up due to some reason. This issue has been fixed.
Severity / Probability
low / low
Request No.
1506238
VPN Service
4. 2. 13
low / low
1506194
VPN Client for Mac
Table 13 Barracuda NG Admin Module
VPN Client for Mac
Patch
2. 0 SP2
Description
Mac OSX 10. 6. 3 was in a VPN connection erroneously not using the VPN DNS Server. This issue has been fixed.
Severity / Probability
low / medium
Request No.
1506440
7 Migration and Release Notes 4. 2. 13
Migrating to Barracuda NG Firewall 4. 2. 13
Read this document before updating your system.
After the first reboot following the update, the version information may show a dirty release. It will automatically change to a clean release after approximately three minutes. This is a normal behaviour as execution of the validation function takes time.
Hardware based on i386 compatible CPUs does not provide the functions required for Traffic Shaping. Type rpm -q kernel --qf %{ARCH}\\n within the shell to find out which kernel is present.
For USB memory stick based installation, a 1GB memory stick is required. The ISO image does not fit on a 512 MB memory stick.
Support for Token Ring and FDDI cards is not available.
Minimum System Requirements
Table 11 Minimum system requirements for Barracuda NG Firewall
Operation systems Disk space included (Barracuda OS) 4 GB for gateway installation on harddisks 2 GB for gateway installation on CF RAM 20 GB for Barracuda NG Control Center installation 256 MB 400 MHz 1 network interface required
RAM Processor Networking
Table 12 Minimum system requirements for Barracuda NG Admin / Barracuda NG Installer
Windows 2000, Windows XP, Windows Vista (32-bit, 64-bit), Windows 7 (32-bit) Operation systems Note: Barracuda NG Admin additionally supports Windows 7 64-bit. 30 MB 512 MB 1. 3 GHz
Disk space RAM Processor
9 Migration and Release Notes 4. 2. 13
Version Compatibility
Kickstart files required for installation must be created with the Barracuda NG Installer version delivered with your Barracuda NG Firewall product package. They are available on the USB stick.
·
·
When upgrading to 4. 2. 13, ensure that at least 300 MB of free storage space is available for the root partition. If this minimum amount of space is not available, Barracuda Networks highly recommends to re-install the system with a larger root partition instead of upgrading. This is due to blocked services instead of a complete shutdown of the Barracuda subsystem. Barracuda Networks recommends the following procedure to update HA systems.
Step 1: Log-On to the Secondary HA Box
Log into the respective box.
Step 2: Update the Secondary HA Box
· · Enter the Control > Licenses tab and import <filename>. tgz by clicking the Software Update. . . Click OK to start the update sequence.
During the update sequence, Barracuda NG Admin loses connection to the box due to a service shutdown. This has no influence on the update process itself, but it requires manual closing of the Barracuda NG Admin configuration session on this box.
As soon as the update sequence has completed, the secondary HA box may reboot automatically after approximately 2 minutes. · After having assured that the secondary box is fully functional proceed to .
Step 3: Log-On to the Primary HA Box
· Switch all servers from the primary to the secondary box and verify for correct operability. You may leave the primary box in standby mode until correct operability has been verified. [. . . ] Enter the Control > Licenses tab and import <filename>. tgz by clicking the Software Update. . . Click OK to start the update sequence.
· ·
During the update sequence, Barracuda NG Admin loses its connection to the box due to a service shutdown. This has no influence on the update process itself, however, it requires manual closing of the Barracuda NG Admin configuration session on this box.
15 Migration and Release Notes 4. 2. 13
As soon as the update sequence was completed, the primary HA box will reboot automatically after approximately 2 minutes.
Step 4: Unblock All Servers on Primary HA Box
Unblock all servers by clicking Stop Server (Control > Server).
Step 5: Log-On to the Secondary HA Box
Log into the respective box.
Step 6: Block All Servers on Secondary HA Box
Block all he servers there.
Step 7: Verify Functionality of Primary Box
Proceed to the next step after having assured that the primary box is fully functional.
Step 8: Unblock All Servers on Secondary HA Box
Unblock all servers on the respective box.
Step 9: Unblock the Configuration Updates
Do this using the Control > Configuration Updates > Unblock Update button.
Step 10: Update Completed
The update process is finished.
16 Updating a CC and its Managed Systems
Update a Single CC
Before starting the update procedure, block all servers as well as the configuration update using Control > Configuration Updates > Block Update on the CC. Otherwise the update process may fail.
Step 1: Log-On to the Control Center
Enter the Control > Licenses tab and import <filename>. tgz by clicking the Software Update. . . [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE BARRACUDA NG FIREWALL 4.2.13
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual BARRACUDA NG FIREWALL 4.2.13 will begin.