User manual BBE SOUND DI-10
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual BBE SOUND DI-10. We hope that this BBE SOUND DI-10 user guide will be useful to you.
Manual abstract: user guide BBE SOUND DI-10
Detailed instructions for use are in the User's Guide.
[. . . ] v
BBE DI-10 USER MANUAL
Congratulations on the purchase of your BBE DI-10 direct box!
The BBE DI-10 is an active direct box used for converting line out and speaker out signals to balanced and unbalanced signals. The user also has the ability to select between two frequency responses (flat, or speaker compensated). [. . . ] FILTER SWITCH: This switch is used to operate the speaker simulating filter. When the filter is on, a 4th order filter network is activated and the system frequency response is 6dB down at 4kHz. LINE OUT: This 1/4" phone jack provides an unbalanced line level output.
4. When using an amplifier, the output from the power amp section connects to the `speaker input' jack while the amplifier speakers connect to the `speaker through' jack. CAUTION: Never operate an amplifier featuring a tube power stage without a connection to a speaker or sufficient power resistor. LINE INPUT: This is a 1/4" mono phone jack for line level signal insertion. NOTE: Connecting a 1/4" male plug to either the speaker in jack or the line in jack will activate the internal 9 volt battery. 48v phantom power source.
BBE DI-10 INSTALLATION INSTRUCTIONS - 1
SPECIFICATIONS FREQUENCY RESPONSE FILTER OFF . . +54dBu (Phantom Power Supply) OUTPUT CHARACTERISTICS OUTPUT IMPEDANCE . . +9vdc (500hrs)
WARRANTY
Warranty registration of the unit to BBE Sound Inc. However, it is strongly recommended that a copy of the bill of sale is retained for future reference. IT IS THE SOLE RESPONSIBILITY OF THE END USER TO PROVIDE THE BILL OF SALE OR OTHER MEANS OF PROOF OF PURCHASE TO VALIDATE THE WARRANTY IF WARRANTY SERVICE IS REQUIRED. [. . . ] All non-warranty repairs are warranted for a period of 90 days from the date of service. Should the unit fail to operate for any reason, our sole obligation is to repair the unit as described above.
5381 Production Drive, Huntington Beach, CA 92649 Ph: (714) 897-6766 · Fax: (714) 896-0736
Covered by U. S. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE BBE SOUND DI-10
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual BBE SOUND DI-10 will begin.